Blackfin 332 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Blackfin 332 Specifications

  • Length Overall: 33'2"
  • Beam: 10'6"
  • Dry Weight: About 10,500 lb (without engines)
  • Fuel Capacity: 315 gal
  • Deadrise: 23° at the transom
  • Draft: About 1'11"
  • Max Power: 900 hp (twin outboards)
  • Bridge Clearance: About 10'6"
  • Livewells: 35 gal aft, 20 gal in the rigging station
  • Cover Shipping Weight: 46 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or 7oz polyester
  • Coverage: Runs up to the underside of the hardtop, wraps the frame legs, and covers the windshield, console, helm seating, rigging station, bow lounge, cockpit and twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 46 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Blackfin 332 CC center console (33'2", 10'6" beam) with its standard hardtop, introduced in late 2018. Send us your year and a photo if you're unsure.
No. The 302 is about three feet shorter on the hull and six inches narrower, with a different console and seating layout. Order the Blackfin 302 T-Top cover for that boat.
Not for this model. The 332 cover is offered in 9oz solution-dyed polyester or 7oz polyester.
No. The Blackfins built from the 1970s through the 1990s were different, mostly inboard-powered boats. This pattern is for the modern outboard-powered model built in Williston, Florida. If you own a classic Blackfin, contact us with the model and year.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or 7oz polyester (Black) for budget-friendly coverage. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz and 5 years on 9oz). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,750.00  ·  9oz $2,980.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Blackfin 332 T-Top Boat Cover — Custom-Fit for the Blackfin 332 CC With Its Hardtop

The Blackfin 332 CC is the 33-foot center console in the modern Blackfin line, introduced at the 2018 Fort Lauderdale International Boat Show and still listed in later model years. Blackfin built its first boats in 1973 and earned its name with offshore fishing boats, most of them inboard-powered; the brand was later acquired by Seabring Marine, the builder of Monterey Boats, and relaunched around 2017 with an all-new line of outboard-powered center and dual consoles built in Williston, Florida. The 332 measures 33’2″ overall with a 10’6″ beam, weighs about 10,500 lb without engines, carries 315 gallons of fuel and runs a 23° deadrise hull rated for up to 900 hp on twin Mercury or Yamaha outboards; bridge clearance is about 10’6″ and draft about 1’11”. Its hardtop carries an electronics box and a rear access hatch over a windshield with an electrically opening vent, with rod holders built into the hardtop supports. Forward is a dual bow lounge with armrests; the console holds a head and rod storage behind a forward-sliding side hatch; the helm has three bucket seats; and behind it a rigging station with sinks and slide-out coolers holds a 20-gallon livewell, with a 35-gallon livewell aft to port, a starboard transom door to the swim platform and a port tuna door. This T-Top cover is patterned for the Blackfin 332 CC with its hardtop, and like all of our Blackfin boat covers, it’s cut to this hull rather than a generic 33-foot size chart.

How It Fits the Blackfin 332

The cover runs up to the underside of the hardtop and wraps around its legs and the rod holders built into them, then drapes over the windshield and console, the three helm seats and rigging station and the dual bow lounge down to the gunwales, and continues aft over the cockpit and the twin outboards as one piece; the roof, electronics box and any outriggers stay exposed. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or a lighter 7oz fabric for budget-friendly coverage. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3 years on 7oz and 5 years on 9oz fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the next size down, see the Blackfin 302 T-Top cover or its dual-console sister, the Blackfin 302 DC T-Top cover.

Sign up for updates and information about our business