7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
30 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The 20'6", 8'5"-beam 200 Dauntless (found in 2007–2013 listings) with a T-top mounted over the console. If your boat is badged 210 Dauntless, order that cover instead.
No. The 210 Dauntless replaced it for 2014. Both are 20'6" long, but the 210 is slightly wider (8'6") and heavier with a revised layout, so each has its own pattern.
No. It runs up to the underside of the top and wraps around the legs, then covers the console, seating and outboard. The roof stays exposed.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$940.00 · 9oz$1,140.00 · Sunbrella$1,405.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Boston Whaler 200 Dauntless T-Top Boat Cover — Custom-Fit for the Whaler 200 Dauntless With a T-Top
The Boston Whaler 200 Dauntless is the 20-foot Dauntless center console that came before the 210 Dauntless; the listings and spec pages we found run from 2007 to 2013, and BoatTEST calls the 2014 210 Dauntless ‘a very nice evolution from the original 200 Dauntless.’ It’s about 20’6″ overall with an 8’5″ beam, roughly 2,400 lb dry, a 12-inch draft and 16° of deadrise, rated for a single outboard of 150–200 hp; listings show a 75-gallon tank (one spec guide lists 66.5 gallons). The layout has a bow sun pad over a self-bailing anchor locker, a forward console seat with an insulated livewell in the front of the console, a console with an acrylic windshield, six rod holders and a portable head inside, a reversible pilot seat with a slide-out 54-quart cooler, and a stern seat with a folding backrest. This T-Top cover is patterned for the 200 Dauntless with a T-top, and like all of our Boston Whaler boat covers, it’s cut to this hull rather than a generic 20-foot size chart.
How It Fits the 200 Dauntless
The cover runs up to the underside of the T-top and wraps around the frame legs, then drapes over the console, pilot seat, forward console seat and bow sun pad down to the gunwales, and continues aft over the stern seat and the single outboard as one piece — the T-top roof stays exposed. Many 200 Dauntless boats left the factory with a bimini instead; if yours has one, fold it and contact us, and if the top is a tower or unusual frame, send a photo first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the model that replaced it, see the Boston Whaler 210 Dauntless T-Top cover, or compare the Boston Whaler 180 Dauntless T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.