7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
25 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Cape Horn 17 center console — the roughly 17-foot, 8-foot-beam hull sold as the 17, 17 Offshore, 17 OS or 17 CC. We've seen it in listings from about 1999 to 2020. If you're unsure, send us your year and a photo before ordering.
Yes — fold the bimini down first. This cover is cut to peak over the console of a boat without a T-top; it isn't designed to fit around a fixed T-top frame.
No. The 19 and 21 are longer hulls (the 21 is 21'8" with an 8'6" beam), so this cover would be too small. Order the cover listed for your model.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$750.00 · Sunbrella$885.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Cape Horn 17 Center Console Boat Cover — Custom-Fit for the Cape Horn 17 Without a T-Top
The Cape Horn 17 is the smallest center console in the Cape Horn line, a compact fishing boat that turns up in listings from about the 1999 model year through at least 2020, sold variously as the 17, 17 Offshore, 17 OS and 17 CC Offshore. Cape Horn boats are built in Milton, Florida, by Fabbro Marine Group, a family-owned builder that markets its hulls as unsinkable. Listings put it at roughly 17 to 17’9″ overall with a beam of about 8 feet, on a modified-V hull with a sharp entry and wide chines; one 1999 listing gives 40 gallons of fuel. Most examples we found run a single outboard of about 115 hp. The layout is a simple open deck with 360-degree walkaround access: a center console with room for flush electronics, a leaning post at the helm, rod holders, a livewell, an insulated fish box and a self-bailing cockpit. This Center Console cover is patterned for the Cape Horn 17 without a T-top, and like all of our Cape Horn boat covers, it’s cut to this hull rather than a generic 17-foot size chart.
How It Fits the Cape Horn 17
With no T-top, the cover peaks over the console and its windscreen, then slopes down over the leaning post and the open bow and cockpit to the gunwales, so rain runs off the sides instead of pooling on the deck. It continues aft and wraps around the single outboard as one drape. On a hull this short and beamy, the cut keeps the fabric taut from the bow to the transom so it doesn’t sag into the cockpit. If your 17 carries a bimini, fold it down before installing the cover. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Moving up a size? See the Cape Horn 21 T-Top cover or the Cape Horn 22 OS T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.