Cape Horn 24 OS T-Top Boat Cover — Custom-Fit for the Cape Horn 24 OS With Its T-Top
The Cape Horn 24 OS (24 Offshore) is a long-running model in the builder’s Offshore series; we found listings from about the 2003 model year through current boats, and it’s still on the factory site. Cape Horn boats are built in Milton, Florida, by Fabbro Marine Group, a family-owned builder that markets its hulls as unsinkable. Cape Horn’s current lineup groups its center consoles into Offshore (OS) models and XS models, which the builder labels “Extra Seating/Storage.” Cape Horn’s current spec sheet lists the hull at 25’1″ overall with a 9’1″ beam, a 20-inch draft and a 23° deadrise, rated for up to 400 hp with 136 gallons of fuel and a 3,000-lb maximum load. Older boats were often rigged with twin outboards, and listings for them quote larger fuel tanks than the current figure. The deck has a step-up bow for throwing a cast net, a 6-foot, 470-quart insulated fish box below deck, a walk-in lockable console with two storage compartments, a flip-up front console seat over an 85-quart drink cooler, a leaning post with storage on each side, two livewells, a rear seat with a removable backrest and a 20-gallon freshwater system. A T-top with an electronics box and two spreader lights is standard; a hardtop is optional. This T-Top cover is patterned for the Cape Horn 24 OS with its T-top, and like all of our Cape Horn boat covers, it’s cut to this hull rather than a generic 24-foot size chart.
How It Fits the Cape Horn 24 OS
The cover runs up to the underside of the T-top and wraps around its legs, then drapes over the console and its front seat, the leaning post and the step-up bow down to the gunwales, and continues aft over the rear seat and the outboard — single or twin — as one piece; the canopy, electronics box and spreader lights stay exposed. At 25’1″ overall the 24 OS runs longer than its name, so the pattern is cut to the true length rather than a 24-foot chart, which would come up short at the bow or transom. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
24 OS vs. 24 XS
Cape Horn publishes identical hull dimensions for the 24 OS and 24 XS. The OS (Offshore) layout keeps the deck open for fishing, with a flip-up front console seat over an 85-quart drink cooler and a rear seat with a removable backrest. The XS — Extra Seating/Storage — adds forward seating with 320 quarts of storage beneath, puts a 35-gallon livewell under a flip-up rear bench cushion, and gives the bench’s removable backrest two more rocket launchers. Because the seating differs, we list separate covers; check the model name on your title or capacity plate before ordering.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the seating-focused sister model, see the Cape Horn 24 XS T-Top cover; for the smaller Offshore model, see the Cape Horn 22 OS T-Top cover.
