Concept 32 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Concept 32 Specifications

  • Builder: Concept Boats, Opa-locka, Florida (since 1986)
  • Model: 32' Open Deck (Classic series), also listed as 32 CC
  • Length: 32'6"
  • Beam: 8'
  • Dry Weight: About 6,400 lb
  • Fuel Capacity: About 160 gal
  • Deadrise: 24° deep-V
  • Draft: 24"
  • Power: Twin outboards (or a single), up to 1,000 hp
  • Cover Shipping Weight: 45 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: T-top legs, windshield, console, leaning post, bow and aft seating, cockpit and twin or single outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 45 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the open center console Concept 32 — today's 32' Open Deck, often listed as the 32 CC, at 32'6" long with an 8' beam. Concept's earlier 32 FE was listed at the same 32'6" and 8' beam. The 32' Sport Deck, which has a cabin, may need a different fit, so send us photos if that's your boat.
Yes. Many Concept 32s run twin Mercury outboards, and the boat is rated for up to 1,000 hp, though some have a single 450. Either way, the engines are covered as part of the same cover with no separate motor cover needed — just tell us your engine setup when you order.
Our T-Top covers fit any boat with a hard top, whether a T-top or a hardtop; the cover runs up under the top and around its supports and leaves the roof exposed. Some 32s were built with a radar arch instead of a T-top, so if that's your boat, contact us with photos first.
The cover drapes over the forward console seat and the bow seating as well as the leaning post and aft bench. Remove loose bow cushions before covering so the fabric sits flat and sheds water.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,560.00  ·  9oz $2,775.00  ·  Sunbrella $3,270.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Concept 32 T-Top Boat Cover — Custom-Fit for the Concept 32 Center Console

The Concept 32 is an offshore center console from Concept Boats, the Opa-locka, Florida builder that Luis and Belkys Avila founded in 1986. Concept has built a 32 for years — it was sold as the 32 FE around 2012, and today’s Classic-series version is the 32′ Open Deck, which dealers often list as the 32 CC. The factory gives it a 32’6″ length, a narrow 8′ beam, about 6,400 lb dry weight, roughly 160 gallons of fuel, a 24-inch draft and a 24-degree deep-V hull rated for up to 1,000 hp — it’s set up for twin outboards, though some are rigged with a single 450. The standard layout has a plexiglass windshield, a forward console seat, bow seating, a leaning post, an aft bench, a fish box/cooler, built-in rod racks and an anchor locker, and used boats are commonly seen with a fiberglass T-top or hardtop carrying spreader lights and an electronics box. This T-Top cover is patterned for the Concept 32 with its T-top, and like all of our Concept boat covers, it’s cut to this hull rather than a generic 32-foot size chart.

How It Fits the Concept 32

The cover runs up to the underside of the T-top and wraps its legs, so the top, its lights and any rocket launchers stay exposed. Below it, the cover falls over the windshield, console and leaning post, covers the console-front seat and bow seating, and runs out to the rubrail along the 8′ beam. Aft, it spans the cockpit and aft bench and continues over the transom to wrap the outboards — twins or a single — in one piece. Long and narrow, the 32 takes a lot of fabric end to end. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Open Deck, Not the Sport Deck

Concept also builds a 32′ Sport Deck in its Luxury series, with a small cabin, on the same 32’6″ by 8′ dimensions but at about 7,200 lb. This cover is patterned for the open center console 32, so if you have a Sport Deck, or a radar arch in place of a T-top, contact us with photos before ordering. Our T-Top style fits any boat with a hard top, T-top or hardtop, so tell us which top you have and how many engines you run.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Have a smaller Concept? See our Concept 30 T-Top cover and Concept 26 T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })