Contender 31 Tournament Specifications
- Length Overall (LOA): 32'7"
- Beam: 9'8"
- Dry Weight: ~5,850 lbs
- Engine: Twin outboards, max 800 HP combined
- Fuel Capacity: 310 gallons
- Draft: ~23"
- Hull Type: Deep-V, 24.5° deadrise, bracket-mount tournament center console
- Model Years: 2008–2010
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 32'7" Contender 31 Tournament bracket-mount specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 43 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Contender 31 Tournament cover comes in 9oz solution-dyed marine fabric (5-7 years) or premium Sunbrella acrylic (8-10 years). Both are water-repellent, mildew-resistant, and fade-proof.
Yes. Pattern-cut specifically for the 31 Tournament's bracket-mount T-Top legs and tournament hardware layout. Hardtop remains exposed while the cover protects the hull and cockpit.
Under 5 minutes. Drape the cover, align around bracket-mount T-Top legs, and secure with strap-and-buckle tie-downs at the rubrail. Solo installation, no tools needed.
No — please remove the cover before towing your Contender 31 Tournament. Our covers are not designed to be trailered: towing with the cover on can cause severe damage to the cover and voids the warranty. The cover is designed for storage only — on a trailer, boat lift, dry stack, or jet dock — and comes off in minutes at the ramp.
Absolutely. Complete barrier over helm electronics, GPS, radar, fish finder, rocket launcher, outrigger bases, and all cockpit surfaces from UV, rain, salt, and debris.
Your Contender 31 Tournament cover is backed by our manufacturer's warranty for the original purchaser. Materials and workmanship — stitching, straps, buckles, zippers, and other hardware — are covered for 1 year from the purchase date. Fabric is covered for 3 years on 7oz, 5 years on black or navy 9oz, and 6 years on Sunbrella. Covered defects are repaired or replaced after you contact us for a Return Merchandise Authorization (RMA) number. The warranty does not cover improper use, accident or negligence, unauthorized modifications, improper care, mold or mildew, incorrectly placed orders, theft or loss, or acts of God — and traveling with the cover on or using it in the water voids the warranty. See our Warranty page for full details.
Water-resistant with DWR finish. Breathable to prevent mildew — essential for boats stored in humid tournament marina environments.
Yes. Fits all standard production years with factory bracket-mount T-Top. Consistent hull dimensions ensure precise fit.
The Contender 31 Tournament cover is available in 9oz solution-dyed polyester in Navy or Black, 7oz polyester in Black, or premium Sunbrella acrylic in Marine Blue, Black, or Smoke. Choose your fabric and color in the order options above.
Shipping is a $30 flat rate per cover within the continental United States. Because every cover is custom-made to order, please allow 1–3 weeks for your Contender 31 Tournament cover to be made and shipped — you'll receive tracking information as soon as it leaves our facility.
Pricing: 7oz $2,750.00 · 9oz $2,980.00 — your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Contender 31 Tournament T-Top Boat Cover — Elite Tournament Platform Protection
The Contender 31 Tournament is the bracket-mount tournament machine that has dominated kingfish and dolphin circuits for years — a 31-foot hull with 24.5-degree deadrise, a 9’8″ beam, and twin outboards delivering up to 800 combined horsepower. At roughly 5,850 pounds dry, the 31 Tournament’s hand-laminated fiberglass hull with structural PVC core and vinyl ester resins is built to absorb daily offshore punishment while keeping the crew dry and the catch fresh. The bracket-mount configuration maximizes cockpit space for crew work and tournament-critical fish handling. Pair your T-Top cover with a center console curtain for complete helm enclosure between tournament days.
Tournament-Specific Pattern for Tournament-Specific Hardware
The 31 Tournament’s cockpit is stripped for competition — oversized insulated fish boxes, massive aerated livewells, flush-mount rod holders positioned for trolling and chunking, rocket launchers, and outrigger bases that require a cover designed around this exact hardware layout. Our cover wraps around the bracket-mount T-Top legs and drapes precisely over the console, leaning post, and the full 9’8″ beam cockpit without snagging on antenna hardware or outrigger fittings. The strap-and-buckle system secures at the rubrail in under five minutes. Remove the cover before towing — it’s designed for storage, not travel. For Contender’s stepped-hull 32-footer, see our Contender 32 ST T-Top cover.
Keep Your Tournament Investment in Tournament Condition
Between pre-fishing days and weigh-ins, the 31 Tournament sits on a lift or in a dry stack absorbing UV, salt, and humidity. Our 9oz solution-dyed marine fabric delivers 5–7 years of fade-proof, water-repellent, mildew-resistant protection that keeps gelcoat bright, upholstery supple, and electronics shielded from the elements. Sunbrella acrylic extends that to 8–10 years. Double-stitched seams, hem cord at the rubrail, and our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) come standard. For the versatile sport variant in Contender’s mid-range, explore our Contender 25 Sport T-Top cover.