Contender 39 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Contender 39 Specifications

  • Builder: Contender Boats (Homestead, FL)
  • Model Years: About 2013 on (HMY)
  • Length Overall: 39'
  • Beam: 10'10"
  • Fuel Capacity: 500 gal
  • Weight: About 15,400 lb with power
  • Max Power: 1,600 hp
  • Livewells: Two 40 gal pressurized transom wells
  • Cover Shipping Weight: 55 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or 7oz polyester
  • Coverage: T-top frame, console and leaning post, bow, transom and triple or quad outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 55 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

No. Sunbrella isn't offered on the Contender 39 cover. Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty protection or 7oz polyester (Black) for budget-friendly coverage.
The Contender 39 ST center console, built from about 2013 on, with its T-top or hardtop. It is not cut for the 39 FA cabin model.
Contender offered the 39 ST with a standard sport console or a larger walk-in console with a head. Tell us which your boat has when you order so we can confirm fit before we cut.
Yes. The stern section wraps the whole engine package as part of the same cover, so you don't need separate motor covers. Tell us how many engines your boat carries when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or 7oz polyester (Black) for budget-friendly coverage. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz and 5 years on 9oz). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $4,010.00  ·  9oz $4,350.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Contender 39 T-Top Boat Cover — Custom-Fit for the Contender 39 ST Center Console

Contender Boats was founded in 1984 by Joe Neber and is based in Homestead, Florida, where its larger boats are built. Our cover maker lists this pattern simply as the Contender 39, cut for the 39-foot center console sold as the 39 ST; HMY dates the 39 ST from 2013, and Sport Fishing’s 2025 buyers guide says it has been around for about a decade. Sport Fishing gives it 39 feet overall, a 10’10” beam, 500 gallons of fuel and 15,400 lb with power, rated for 1,600 hp from Yamaha outboards — usually three or four. Contenders are semi-custom, and the 39 ST is offered with a standard sport console with a clear enclosure and side-entry door or an optional extra-large walk-in console with a head, plus an optional coffin box or forward lounge. The features a cover has to clear also include the T-top or optional hardtop, a leaning post, two pressurized 40-gallon transom livewells and a full transom with a dive platform and door. This T-Top cover is patterned for the 39 with its T-top, and like all of our Contender boat covers, it’s cut to this hull rather than a generic 39-foot size chart.

How It Fits the 39

The cover runs up to the underside of the top and wraps its supports, leaving the roof exposed. It drapes over the console and leaning post, spreads forward over the bow and any coffin box or lounge to the rubrail along the 10’10” beam, and continues aft over the transom livewells and dive platform to wrap the outboards in one piece. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

39 ST or 39 FA?

Contender also builds a 39 FA (Fish Around), reviewed from 2017, with a cabin under the console and a slightly narrower 10’8″ beam. It’s a different boat from the 39 ST, so if you own a 39 FA, contact us before ordering.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or a lighter 7oz fabric for budget-friendly coverage. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3 years on 7oz and 5 years on 9oz fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the next size down, see the Contender 36 Open T-Top cover; for the flagship, the Contender 44 ST T-Top cover.

Sign up for updates and information about our business