7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
22 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It is patterned for the East Cape 17 EVO X — the 2° flat-bottom version of the 17 EVO, which East Cape lists at 16'4" long with a 5'10" beam. The 18 EVO X is a different, larger hull (17'9" with a 6'7" beam), so it takes our East Cape 18 cover instead.
This listing is patterned for the 17 EVO X. The EVO V shares the 17 series length and beam but uses a 14° V-hull instead of the X's 2° bottom, so if you own a V, contact us before ordering so we can confirm the pattern.
East Cape builds the 17 EVO X with side, center, flush-mount or tiller steering. The cover peaks over the console, so the console position matters — let us know how your boat is rigged when you order and we will confirm the fit.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is designed for storage only — on a trailer, lift, dry stack, or at the dock. Towing with it installed can damage the cover and voids the warranty, so take it off before you hit the road.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$750.00 · Sunbrella$885.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
East Cape 17 EVO X Center Console Boat Cover — Custom-Fit for East Cape’s 2° Poling Skiff
The 17 EVO X is the flat-bottomed member of East Cape’s 17 EVO series, built one at a time in Longwood, Florida, for skinny backcountry water. East Cape lists it at 16’4″ long with a 5’10” beam, just 2° of deadrise, a 4″–7″ draft, a 20-gallon fuel tank, 60–90 hp of outboard power and room for four. The hull is fully infused and cored with vinylester resin, with an optional carbon package that adds an aramid (Kevlar) bottom, and a tunnel is optional. Up front is a full-width casting deck with nothing underfoot, with front and rear storage hatches, and East Cape specs the steering per build — side, center, flush-mount or tiller. This center console cover is patterned for the 17 EVO X with its console, and like all of our East Cape boat covers, it’s cut to this hull rather than a generic 17-foot size chart.
How It Fits the 17 EVO X
Because the EVO X is so low and narrow, the cover sits close to the boat: it peaks over the console and slopes down to the gunwales on both sides, lying flat across the open bow casting deck and the rear hatch area so rain runs off instead of pooling on the low deck. At the stern it wraps the outboard as part of the same piece, so the powerhead, cowling and transom stay covered without a separate motor hood. A trim, form-following fit matters on a skiff this light — there is less loose fabric to catch wind on a lift or trailer. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or at the dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Sizing up between East Cape hulls? Compare our East Cape 18 center console cover and the East Cape 17 Glide cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.