Everglades 273 T-Top Boat Cover — Custom-Fit for the Everglades 273 CC Center Console
Everglades Boats builds its boats in Edgewater, Florida, using its patented RAMCAP (Rapid Molded Core Assembly Process) construction, in which molded foam modules are bonded into the hull and deck to form one solid piece. The 273 CC came out at the end of 2016 — Boating tested it that October and Salt Water Sportsman in 2017 — and dealers still list new 2025 models. BoatTest gives it 27’3″ overall, a 9’3″ beam, an 18-inch draft, about 6,400 lb dry, 157 gallons of fuel and 20 degrees of transom deadrise on a variable-deadrise deep-V, rated for 500 hp; Yamaha packages run from twin 200s or 250s to a single 425, and Boating also tried a single 350. The features a cover has to clear include the hardtop on an in-house powder-coated aluminum frame that is carried by the console rather than the deck — which keeps the 19-inch side decks open — with four rocket launchers, spreader lights and zippered life-jacket storage, a power-sliding tempered-glass windshield, a two-person forward console seat over a 97-quart cooler, bow lounges with quick-release backrests, a leaning post with a prep sink and livewell, a console head and a folding stern seat with two jump seats. This T-Top cover is patterned for the 273 CC with its console-mounted hardtop, and like all of our Everglades boat covers, it’s cut to this hull rather than a generic 27-foot size chart.
How It Fits the 273 CC
The cover runs up to the underside of the hardtop and wraps the frame where it meets the console, leaving the roof and rocket launchers exposed. Because the top rises from the console, the side decks stay clear, and the fabric drops straight to the rubrail along the 9’3″ beam. Forward, it covers the console seat and the bow lounges — pull the removable backrests first — and aft it runs over the leaning post and folded stern seat to wrap the outboard power in one piece. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
273 or 275?
The 273 is not the 275 renamed. It is a newer design about six inches narrower at 9’3″, with a hardtop carried by the console and a different bow layout, so the two covers are cut to different patterns.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the earlier 27-footer on a 9’9″ beam, see the Everglades 275 CC T-Top cover; for the newer 28-footer, the Everglades 285 CC T-Top cover.
