Grady White 247 Advance T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Grady White 247 Advance Specifications

  • Builder: Grady-White Boats (Greenville, NC)
  • Model Years: 1997–2002 (HMY)
  • Length Overall: About 24'9"
  • Beam: 8'6"
  • Draft: About 15"
  • Dry Weight: About 3,500 lb
  • Fuel Capacity: 151 gal (some listings 156)
  • Max Power: 350 hp, single or twin outboards
  • Hull: SeaV2 deep-V
  • Cover Shipping Weight: 34 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: T-top legs, console, leaning post, forward seat and casting platforms, transom livewell and outboard(s)
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 34 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Grady-White Advance 247 center console built from 1997 to 2002, with its T-top and integrated outboard mounting platform. It is not cut for the later 257 or for Grady-White's walkaround cabin models.
Grady-White rigged this model with either a single outboard or twins. The stern section wraps the power as part of the cover, so tell us your engine setup when you order and we'll confirm the fit.
Yes. The stern section runs over the integrated mounting platform and wraps the outboard power as part of the cover, so the platform and engine are protected along with the cockpit.
Our T-Top style is made for any boat with a hard top — a T-top, a hardtop or a top integrated with the windshield. The cover runs up under the top and around its supports, so the roof stays exposed. If your boat has outriggers, a tower or an aftermarket top, send us photos before ordering.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,200.00  ·  9oz $1,490.00  ·  Sunbrella $1,775.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Grady White 247 Advance T-Top Boat Cover — Custom-Fit for the Grady-White Advance 247 Center Console

Grady-White Boats has built its boats in Greenville, North Carolina, since 1959. The Advance 247 is a 24-foot center console that HMY’s guide dates to 1997 through 2002, built on Grady-White’s SeaV2 hull. Listings give it about 24’9″ overall, an 8’6″ beam, a draft of about 15 inches, 3,500 lb dry and a fuel tank listed at 151 gallons (some listings say 156), with a 350 hp rating; boats were rigged with a single outboard such as a Yamaha 250 or with twin 150s. Its signature is the integrated outboard mounting system, which doubles as a swim platform with a ladder. The features a cover has to clear include the factory T-top with rod holders, radio box and spreader light, a console with a lockable electronics box and an enclosed head behind a starboard door, a forward console seat, raised forward casting platforms over two 120-quart insulated fish boxes, a leaning post, a removable rear seat, a centered above-deck transom livewell, a bow pulpit and a 62-square-foot cockpit. This T-Top cover is patterned for the Advance 247 with its T-top, and like all of our Grady White boat covers, it’s cut to this hull rather than a generic 25-foot size chart.

How It Fits the Advance 247

The cover runs up to the underside of the T-top and wraps its legs, leaving the top, radio box and rod holders exposed. It falls over the console and leaning post, spreads forward over the forward console seat and raised casting platforms to the rubrail along the 8’6″ beam, and continues aft over the transom livewell and the integrated mounting platform to wrap the outboard power in one piece. Lift out the removable rear seat first so the cockpit lies flat. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

247 or 247 Advance?

We list a Grady White 247 cover and this 247 Advance cover on separate pages. Grady-White sold its 24-foot 247 center console as the Advance 247, so if you aren’t sure which page matches your boat, send us the hull ID or a few photos and we’ll confirm the pattern before you order.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your boat is listed simply as a 247, also see the Grady-White 247 T-Top cover; for the 25-footer that followed the 247, the Grady-White 257 T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })