7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
30 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
Center Console is our cover maker's name for the full-coverage style, made for any boat without a T-top or hardtop. It covers the whole boat from bow to stern and rubrail to rubrail, windshield and engine included. If your boat has a T-top or hardtop, you want our T-Top style instead, which fits up under the top.
It's cut to the pattern our cover maker lists as the Key West 200 XT. We couldn't find published factory specs for that name, so we confirm every order by measurements and photos before the cover is made.
Check the model on your registration or the builder's plate and measure the overall length and beam and send both figures to us. Send us your model year, length, beam and console type (single console or dual console, and any T-top, hardtop or poling platform), plus a photo if the boat has been modified, and we'll confirm the fit before you order.
Then one of those patterns is a better match. Key West's 2020 is about 20'2" long with an 8' beam and the 203 FS is 20'3" by 8'; tell us your measurements and model badge and we'll point you to the right cover.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$895.00 · Sunbrella$1,045.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Key West 200 XT Center Console Boat Cover — Custom-Fit for the Key West 200 XT
Key West Boats builds saltwater fishing boats in Ridgeville, South Carolina; the company says Hutch Holseberg has been working since 1986 to build a high-quality, good-value mid-sized fishing boat, and it is still privately owned. Every hull uses no-wood construction with a foam-injected fiberglass stringer system, and the builder foam-fills its 20-foot and larger models for level, upright flotation. Our cover maker lists this pattern as the Key West 200 XT. We could not find a factory spec sheet, brochure or dealer listing for a Key West model by that name, so we treat it as a 20-foot Key West and confirm the fit with every owner before cutting. For comparison, Key West’s documented 20-foot hulls are the 2020 (about 20’2″ long with an 8-foot beam and a 60-gallon tank, built through the 2000s) and the 203 FS (20’3″ by 8′, 50 gallons, 200 hp maximum), so your length and beam measurements tell us right away which family your boat belongs to. This full cover is patterned for the Key West 200 XT without a top, and like all of our Key West boat covers, it’s cut to that pattern rather than a generic 20-foot size chart.
How It Fits the 200 XT
The cover goes on as one piece: it peaks over the windshield and console, slopes forward over the bow and casting deck, and falls aft over the leaning post or seat and the cockpit to the rubrail on both sides. At the transom it wraps the swim platform and closes around the single outboard, so rain runs off the console peak instead of collecting in the cockpit. Fold any bimini into its boot first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Please Confirm Before You Order
Because published data on the 200 XT is so thin, send us your model year, overall length, beam and a photo of the console and transom. If your boat turns out to match another Key West pattern, we’ll point you to that cover instead.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Similar 20-foot patterns include our full cover for the Key West 2020 and our full cover for the Key West 203.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.