Mako 18 LTS Specifications
- Length Overall (LOA): 18’6”
- Beam: 7’7”
- Dry Weight: 1,755 lbs
- Engine: Single outboard, max 115 HP
- Fuel Capacity: 28 gallons
- Draft: ~11”
- Hull Type: Rapid Planing System (RPS) with 13° deadrise, 100% composite
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: Full center console cover wraps entire hull from bow to stern
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 18’6” Mako 18 LTS specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 23 lbs |
|---|---|
| Fabric | 9oz Polyester |
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Mako 18 LTS cover is built from 9oz solution-dyed marine fabric rated for five to seven years of UV and weather resistance. A 7oz lighter option and a premium Sunbrella acrylic upgrade (eight to ten years) are also available. Solution-dyed construction fuses pigment into each fiber, preventing dye transfer to your 18 LTS’s gel coat.
The 18 LTS cover is a full center console cover that wraps the entire boat from bow to stern, covering the console, cockpit, and engine. It secures at the rubrail with a hem cord and adjustable tie-down straps for a snug, complete fit.
Installation takes under five minutes with one person. Drape the cover from bow to stern over the center console, and secure with the adjustable tie-down straps and hem cord at the rubrail. No tools required.
Yes. The cover is reinforced at every stress point for highway-speed trailering. The hem cord and strap-and-buckle system keep the cover locked tight against wind buffeting during transport.
Absolutely. The cover creates a complete barrier over the entire boat, protecting your console electronics, upholstery, rod holders, livewell, and engine from UV rays, rain, salt spray, pollen, and bird droppings.
Every cover includes a 2-year manufacturer warranty on materials and workmanship. The fabric carries a separate durability rating — five to seven years for 9oz solution-dyed and eight to ten years for Sunbrella acrylic.
The cover is water-resistant with a DWR (durable water repellent) finish. Rain and spray bead off the surface while the breathable fabric lets trapped moisture vent from underneath, preventing mildew and keeping your 18 LTS’s cockpit dry.
Yes. The cover fits all standard-production Mako 18 LTS model years. If your boat has significant aftermarket modifications, contact us at 843-760-6101 to confirm fitment.
The 9oz solution-dyed fabric ships in Navy or Black with a 5-year fabric warranty. Sunbrella acrylic adds Black, Smoke, and Marine Blue with a 6-year fabric warranty.
Shipping is a $30 flat rate per cover to anywhere in the continental United States. Orders typically ship within 1-2 business days.
Mako 18 LTS Center Console Boat Cover — Inshore Performance Protection
The Mako 18 LTS is an 18’6” center console built on a 100% composite hull with Mako’s Rapid Planing System (RPS) — a design that gets on plane quickly and stays efficient at cruising speeds. With a 7’7” beam, up to 115 horsepower, and 28 gallons of fuel at 1,755 pounds dry, the 18 LTS is purpose-built for anglers who fish inshore bays, flats, and nearshore reefs. A 13-degree deadrise and 11 inches of draft give this hull the stability to drift-fish oyster bars and the capability to handle a moderate coastal chop. Pair this nimble platform with boat shade kits and a custom cover from Perfect Fit Boat Covers to keep it protected between trips.
Tailored to the 18 LTS’s Purpose-Built Layout
Our cover is custom-cut to the Mako 18 LTS’s specific hull dimensions, wrapping over the center console, open cockpit, and engine from bow to stern. The cover secures at the rubrail with a hem cord and adjustable tie-down straps, creating a tight fit that eliminates pooling and flapping in wind. One person can install the cover in under five minutes — drape, strap, and buckle. Reinforced stress points handle highway-speed trailering without loosening, and at 11 inches of draft the 18 LTS launches from the shallowest ramps. For the next step up in Mako’s center console lineup, explore the Mako 20 center console cover built with the same custom-fit precision.
Protection That Matches Mako Composite Quality
Select our 9oz solution-dyed marine fabric for five to seven years of UV and weather resistance, or upgrade to Sunbrella acrylic for eight to ten years of premium performance. Both options are water-repellent, mildew-resistant, and breathable — rain beads off while trapped moisture escapes from underneath. Solution-dyed fibers lock color into every thread so there is zero dye transfer to the 18 LTS’s gel coat. Double-stitched seams and a 2-year manufacturer warranty come standard. For a larger Mako offshore T-Top cover built with the same quality, check out the Mako 254 T-Top cover.
Reviews
There are no reviews yet.