Nautic Star 244 XTS T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

NauticStar 244 XTS Specifications

  • Builder: NauticStar Boats (Amory, Mississippi)
  • Model Years: About 2015 to 2019
  • Length: 24'6"
  • Beam: 8'6"
  • Weight: About 2,500 lb
  • Fuel Capacity: 74 gal
  • Deadrise: 16° at the transom
  • Max Power: 300 hp, single outboard
  • Top: Optional canvas, powder-coat or fiberglass T-top
  • Cover Shipping Weight: 34 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: T-top legs, console and windshield, forward deck, leaning post, jump seats, transom and outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 34 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The 244 XTS bay boat — 24'6" with an 8'6" beam — with a T-top and a single outboard. Please give us your model year when you order so we can confirm the fit.
No. The 249 XTS that came out for 2020 is a different hull at 24'3", with its own pattern. Choose the model name on your hull.
A trolling motor has to come off before the cover goes on — there are too many styles to pattern around, and the order form asks you to agree to remove it. Power-Poles and other shallow-water anchors are different: select them in the Power Poles field when you order, then fill in the Power Pole Measurement Form that pops up and email it to info@perfectfitboatcovers.com so we can cut the cover around them.
Our T-Top style is made for any boat with a hard top — an aluminum T-top frame with a canvas roof, a powder-coated frame, or a fiberglass top. The cover runs up under the top and around its supports, so the roof stays exposed. NauticStar offered this model with a choice of canvas, powder-coat and fiberglass T-tops, so tell us which one your boat has when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,200.00  ·  9oz $1,490.00  ·  Sunbrella $1,775.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

NauticStar 244 XTS T-Top Boat Cover — Custom-Fit for the 244 XTS Bay Boat

NauticStar Boats was founded in 2002 by Phil Faulkner in Amory, Mississippi, which was still home to its headquarters and factory when MasterCraft bought the company in October 2017; MasterCraft sold the NauticStar business to Iconic Marine Group in September 2022. The 244 XTS is NauticStar’s earlier 24-foot bay boat, with factory specs on file from 2015 through 2019. It measures 24’6″ with an 8’6″ beam and weighs about 2,500 lb; it carries 74 gallons of fuel, drafts about 14 inches, and has 16 degrees of deadrise at the transom and 40 at the entry, with a single outboard to 300 hp. The two-tone elevated console has a removable curved windshield, six vertical rod holders and a 13-gallon livewell; an optional head console replaced the five-drawer tackle storage. Behind it is a deluxe leaning post with a 94-quart cooler and aft jump seats, with a 37-gallon livewell aft, a 30-gallon insulated bow fish box, and port and starboard lockers holding ten rods. A trolling motor harness was standard and Power-Pole shallow-water anchors were a factory option. T-tops were optional — canvas on aluminum, powder-coat, or fiberglass with LED map lights (with the head console). This T-Top cover is patterned for the 244 XTS with its T-top, and like all of our NauticStar boat covers, it’s cut to this hull rather than a generic 24-foot size chart.

How It Fits the 244 XTS

The cover runs up to the underside of the T-top and wraps its legs, so the roof stays exposed. Below it the cover drapes over the windshield and console, the forward casting deck and rod lockers, then the leaning post and jump seats, and falls to the rubrail along the 8’6″ beam. Aft, it covers the transom and wraps the single outboard in the same piece. A bow-mount trolling motor comes off before the cover goes on, and Power-Poles are handled through the order form. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the newer 24-footer, see the NauticStar 249 XTS T-Top cover; for a smaller XTS, see the NauticStar 227 XTS T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })