Parker 21 SE Specifications
- Length Overall (LOA): 21'0" (1998–2024); 21'2" (2025)
- Beam: 8'6"
- Dry Weight: ~2,635 lbs (1998–2024); ~3,931 lbs with T-top (2025)
- Engine: Single outboard, max 200 HP
- Fuel Capacity: 84 gallons (95 gallons on 2025 models)
- Draft: ~10"
- Hull Type: Modified-V center console, 14° deadrise (Special Edition)
- Model Years: 1998–2025
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: Full-boat center console cover wraps the entire hull including the outboard; tent-like shape peaks at the console
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to the Parker 21 SE center console without a T-Top, including console and engine dimensions
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 31 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Parker 21 SE cover is available in two fabric options: 9oz solution-dyed polyester for heavy-duty everyday protection, or premium Sunbrella acrylic for maximum UV resistance and longevity. Solution-dyed fabric has the color built into each fiber, so it resists fading and won't transfer dye onto your 21 SE's gelcoat or cushions.
Yes — this cover is made specifically for the Parker 21 SE center console without a T-Top. It drapes over the whole boat in one piece, peaking at the console and sloping down to the gunwales, and wraps over the outboard at the stern. If your 21 SE has a T-Top, choose our Parker 21 SE T-Top cover instead.
Installation takes about five minutes and one person can do it. Drape the cover over the 21 SE from bow to stern, pull it down over the console and outboard, run the hem cord along the rubrail, and cinch down the adjustable strap-and-buckle tie-downs. No tools, snaps, or support poles are required.
No — please remove the cover before towing your Parker 21 SE. Our covers are not designed to be trailered: towing with the cover on can cause severe damage to the cover and voids the warranty. The cover is designed for storage only — on a trailer, boat lift, dry stack, or jet dock — and comes off in minutes at the ramp.
Yes. While your 21 SE is stored, the cover creates a complete barrier over the console electronics, leaning post, cushions, hatches, and outboard — blocking UV rays, rain, salt spray, bird droppings, and pollen. Keeping the helm and upholstery covered between trips is one of the easiest ways to protect your investment.
Your Parker 21 SE cover is backed by our manufacturer's warranty for the original purchaser. Materials and workmanship — stitching, straps, buckles, zippers, and other hardware — are covered for 1 year from the purchase date. Fabric is covered for 5 years on black or navy 9oz and 6 years on Sunbrella. Covered defects are repaired or replaced after you contact us for a Return Merchandise Authorization (RMA) number. The warranty does not cover improper use, accident or negligence, unauthorized modifications, improper care, mold or mildew, incorrectly placed orders, theft or loss, or acts of God — and traveling with the cover on or using it in the water voids the warranty. See our Warranty page for full details.
The cover is highly water-resistant rather than fully waterproof. Both fabrics carry a DWR (durable water repellent) finish that sheds rain and spray while staying breathable, and the tent-like shape peaking at the console helps rain run off instead of pooling. That breathability helps keep mildew and condensation off the cushions and deck.
This cover is patterned for the standard Parker 21 SE center console with no T-Top and no bow or stern obstructions. If your boat has added hardware like a bow-mounted trolling motor, a poling platform, a jack plate, or outriggers, contact us before ordering so we can confirm fit.
The 21 SE cover is available in 9oz solution-dyed polyester in Navy or Black, or premium Sunbrella acrylic in Marine Blue, Black, or Smoke. Choose your fabric and color in the order options above.
Shipping is a $30 flat rate per cover within the continental United States. Because every cover is custom-made to order, please allow 1–3 weeks for your 21 SE cover to be made and shipped — you'll receive tracking information as soon as it leaves our facility.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Parker 21 SE Center Console Boat Cover — Full-Boat Protection for Parker’s 21-Foot Special Edition
The Parker 21 SE (Special Edition) is a 21-foot center console — about 23 feet overall with its engine — built on Parker’s modified-V hull with a 14-degree deadrise, an 8’6″ beam, roughly 2,635 lbs dry, and a shallow 10-inch draft that lets it work backcountry creeks as easily as nearshore structure. Owners typically run a single outboard in the 150–200 HP range, and the layout keeps Parker’s no-nonsense fishing focus: a console big enough for two displays, a sturdy leaning post with rocket launchers and a livewell, a spacious forward fish box on gas struts, and open, snag-free decks with 360-degree fishability. Parker builds its boats in Beaufort, North Carolina, and a 21 SE stored without a T-Top leaves the console, seating, and electronics fully exposed to sun and weather. See all of our Parker boat covers.
Tailored to the 21 SE’s Open Center Console Layout
This cover is built for Parker 21 SEs without a T-Top, and it’s pattern-cut to the 21 SE’s hull, accounting for the console, the leaning post, the bow and forward fish box, the stern, and the outboard. The solution-dyed fabric drapes over the entire boat in one continuous piece, forming a tent-like shape that peaks at the console so rain runs off the sides instead of pooling on the decks, and it wraps down over the outboard for complete coverage. Installation takes about five minutes — drape it from bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. The cover is built for storage on a trailer, boat lift, dry stack, or jet dock. Remove the cover before towing — it’s designed for storage, not travel, and towing with it on voids the warranty. Does your 21 SE have a T-Top? See the Parker 21 SE T-Top cover.
Protection That Matches Parker Quality
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection with a 5–7 year service life, or premium Sunbrella acrylic for 8–10 years of fade-resistant protection. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams to stand up to salt spray, summer storms, and the sun that bakes the 21 SE’s helm electronics, cushions, and gelcoat. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5–6 years on the fabric) and ships for a $30 flat rate within the US — because every cover is made to order, please allow 1–3 weeks. Stepping up to the bigger Special Edition? Take a look at the Parker 23 SE center console cover.