Parker 2801 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Parker 2801 Specifications

  • Builder: Parker Boats (Beaufort, NC)
  • Length: 28' hull; 33' overall with bracket (factory)
  • Beam: About 9'6"
  • Draft: About 17"
  • Deadrise: 21°
  • Dry Weight: About 5,000 lb
  • Fuel: 232 gal
  • Power: Twin outboards, up to 600 hp total
  • Transom: Full transom, engine bracket, transom door
  • Cover Shipping Weight: 38 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the T-top/hardtop, wraps the legs, and covers the console, leaning post, livewell, forward seating, bow, bracket and both outboard cowlings; roof stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 38 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's made for the Parker 2801 Center Console — 28' hull, about 9'6" beam, full transom with engine bracket — with a T-top or hardtop. Parker changed the 2801's console and transom over the years, so please confirm your model year and which top you have when you order so we can check the pattern before we cut.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and around its supports either way. Parker has offered more than one top for the 2801, so tell us which one your boat has when you order.
A bow pulpit with roller and windlass was a Parker option on the 2801. Tell us when you order whether your boat has one so we can confirm the bow of the pattern matches.
The cover runs over the transom and falls as one loose drape over the outboard cowling (or both cowlings on a twin rig); there's no fitted engine pocket, and the lower units stays exposed below the hem.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,415.00  ·  9oz $2,625.00  ·  Sunbrella $3,080.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Parker 2801 T-Top Boat Cover — Custom-Fit for the Parker 2801 Center Console

Parker Boats builds its fiberglass fishing boats in Beaufort, North Carolina, an area known for more than two centuries of hand-built boats. The 2801 Center Console is Parker’s largest center console that we cover: a full-transom deep-V fishing boat with a single-level deck. Factory specs give a 28′ hull at 33′ overall with the bracket, a beam of about 9’6″, 21 degrees of deadrise, about 17 inches of draft, a dry weight of about 5,000 lb and 232 gallons of fuel, rated for up to 600 hp on twin outboards. The transom carries an engine bracket with a swim platform and ladder, a transom door and an insulated fishbox. The large console has a windshield, a forward-facing cushioned seat and a lockable door to a head with about 65 inches of headroom, and standard gear includes a leaning post with rocket launchers and a 30-gallon above-deck livewell. Options have included vee seats with storage forward, a folding cockpit seat, a bow pulpit with windlass, and either an aluminum T-top with a six-rod rocket launcher or a fiberglass hardtop with an electronics box. This T-Top cover is patterned for the Parker 2801 with its T-top, and like all of our Parker boat covers, it’s cut to this hull rather than a generic 28-foot size chart.

How It Fits the Parker 2801

The cover runs up to the underside of the T-top or hardtop and wraps its legs, so the roof and anything mounted on it stay exposed. Below it the cover takes in the console, the leaning post and livewell and any forward seating, then runs up the deep-V bow to the stem and falls to the rubrail along both sides. Aft, it covers the transom and bracket and falls as one loose drape over both outboard cowlings, with the lower units exposed. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the next size down, see our Parker 2400 CC T-Top cover or the Parker 2300 DV T-Top cover.

Sign up for updates and information about our business