Pathfinder 2600 TRS T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Pathfinder 2600 TRS Specifications

  • Builder: Pathfinder Boats / Maverick Boat Group (Fort Pierce, FL)
  • Length: 26'2"
  • Beam: 8'10"
  • Draft: About 15"
  • Deadrise: 18°
  • Fuel: About 70–81 gal (by source)
  • Power: Single outboard (350–450 hp max by source)
  • Hull: Double-stepped, vacuum-infused
  • Cover Shipping Weight: 36 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the hardtop/T-top, wraps the supports, and covers the console, helm seating, bow lounge, stern casting deck and outboard cowling; roof stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 36 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's made for the Pathfinder 2600 TRS — 26'2" with an 8'10" beam — fitted with a hardtop or T-top. Please confirm your model and year when you order so we can check the pattern before we cut.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way. Pathfinder has offered both a canvas T-top and a fiberglass hardtop for the 2600 TRS, so tell us which one your boat has when you order.
Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one.
If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,550.00  ·  9oz $1,750.00  ·  Sunbrella $2,080.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Pathfinder 2600 TRS T-Top Boat Cover — Custom-Fit for the Pathfinder 2600 TRS

Pathfinder bay boats are built by Maverick Boat Group in Fort Pierce, Florida. The 2600 TRS is Pathfinder’s 26-foot family fishing boat, and TRS refers to its third row: lids in the stern casting deck lift to reveal seating that folds out of the way when you want to fish. It’s built on a 26’2″ double-stepped, vacuum-infused hull with an 8’10” beam, about 15 inches of draft and 18 degrees of deadrise, rated for a single outboard; sources list fuel at about 70 to 81 gallons and the maximum rating at 350 to 450 hp. The bow converts to a lounge with a plug-in table, the console has a seat with a built-in cooler and a compartment for an optional head with about 5 feet of headroom, and there’s a 36-gallon livewell to port and locking rod storage. A fiberglass hardtop or T-top is optional. This T-Top cover is patterned for the Pathfinder 2600 TRS with its T-top, and like all of our Pathfinder boat covers, it’s cut to this hull rather than a generic 26-foot size chart.

How It Fits the Pathfinder 2600 TRS

The cover runs up to the underside of the hardtop or T-top and wraps its supports, so the roof and any rod holders on it stay exposed. Below it the cover takes in the console and helm seating, then runs over the bow lounge and casting deck to the stem and falls to the rubrail along the 8’10” beam. Aft, it covers the stern casting deck with the third-row seats folded away and falls as one loose drape over the outboard cowling, with the lower unit exposed. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Not the Same as the 2600 HPS

The 2600 HPS and 2600 TRS are both 26’2″ Pathfinders with an 8’10” beam and 18 degrees of deadrise on a stepped hull. The HPS is the all-out fishing layout, with large flush casting platforms, an 80-gallon fishbox and livewells bow and stern; the TRS adds seating that folds out of the stern casting deck, a bow lounge with a table and a console with a head compartment. Each has its own pattern.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the all-out fishing layout, see our Pathfinder 2600 HPS T-Top cover; for the 24-foot TRS, see the Pathfinder 2400 TRS T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })