Factory 180 Models: 180 Sportfish and 180 Islander
Cover Shipping Weight: 26 lbs
Cover Features
Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
Coverage: Full cover from bow to stern and rubrail to rubrail, peaking over the console and windshield and covering the bow casting deck, pilot seat, cockpit and outboard cowling
Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
26 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's made for an 18-foot Pioneer sold as a 180, without a T-top. Pioneer builds both the 180 Sportfish and the 180 Islander on this 17'10" hull, so please confirm your model and year when you order and we'll check the pattern before we cut.
If your paperwork says 180 Islander, order the 180 Islander cover, which is cut for its bow cushions and full stern bench. If it says 180 Sportfish or just 180, contact us with your model year and we'll confirm which pattern fits.
No. This style covers the whole boat and peaks over the console, so it won't go over a T-top. Pioneer offers a T-top package on the 180; our 180 Islander T-Top cover fits that setup on the Islander.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$835.00 · Sunbrella$985.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Pioneer 180 Center Console Boat Cover — Custom-Fit for the Pioneer 180
Pioneer Boats builds its boats in Walterboro, South Carolina. Pioneer builds two 18-footers on the same hull: the 180 Sportfish, set up for inshore fishing, and the 180 Islander, set up for family seating, and listings often shorten either to 180. Factory pages list a 17’10” centerline length, a 7’7″ beam, about 11 inches of draft, 15 degrees of deadrise and a 20-inch transom, with a single outboard up to 140 hp; dry weight is given as about 1,100 lb on earlier spec sheets and 1,350 lb on the current one, and fuel as 33 to 40 gallons. The 180 Sportfish carries a large bow casting deck, a four-tube console rod rack, a livewell with a 12-gallon sea chest, a fold-down seat ahead of the console, a reversible pilot seat over a cooler and a windshield, with jump-seat cushions and a bow cushion among the options. This Center Console cover is patterned for the Pioneer 180 without a T-top, and like all of our Pioneer boat covers, it’s cut to this hull rather than a generic 18-foot size chart.
How It Fits the Pioneer 180
The cover peaks over the console and windshield and slopes down to the gunwales, so rain runs off instead of pooling. Forward it covers the console seat and the bow casting deck and runs to the stem; through the middle it takes in the pilot seat, falling to the rubrail along the 7’7″ beam. Aft, it covers the cockpit and falls as one loose drape over the outboard cowling, with the lower unit exposed. Because the 180 name covers two layouts, we check your model and year against the pattern before cutting. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the family layout, see our Pioneer 180 Islander Center Console cover; for the slightly longer 18-footer, see the Pioneer 186 Center Console cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.