Pursuit 328 S Specifications
- Builder: Pursuit Boats, Fort Pierce, FL
- Type: Sport center console with hardtop
- Length: 34'6"
- Beam: 10'10"
- Draft: 1'11" (motors up)
- Dry Weight: About 12,160 lb (twin F300s)
- Fuel: 300 gal (later boats: 288 gal)
- Deadrise: 20°
- Power: Twin outboards, up to 700 hp
- Cover Shipping Weight: 45 lbs
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
- Coverage: Runs up to the underside of the hardtop, wraps its supports, and covers the helm seating, entertainment center, bow seating, cockpit and outboard cowlings; the roof stays exposed
- Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
- Protection: UV-resistant, water-repellent, breathable
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 45 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's made for the Pursuit S 328 Sport center console — 34'6" with a 10'10" beam — with its factory hardtop. Please confirm your model and year when you order so we can check the pattern before we cut.
The newer boat has the same length and beam, but Pursuit lists a taller hardtop and a redesigned deck. Tell us your model year and we'll confirm whether this pattern fits before we cut.
Yes. "T-Top" is the name of the cover style, and our T-Top covers are made for any hard top, whether it's a T-top, a hardtop or an arch. The cover fits up under the top and wraps its supports, so the roof stays exposed. If your boat carries anything other than the factory hardtop, tell us which top you have when you order.
The cover runs over the transom and falls as one loose drape over both outboard cowlings; there are no fitted engine pockets, and the lower units stay exposed below the hem.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,560.00 · 9oz $2,775.00 · Sunbrella $3,270.00 — your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Pursuit 328 S T-Top Boat Cover — Custom-Fit for the Pursuit 328 S
Pursuit Boats builds its center consoles and dual consoles in Fort Pierce, Florida. The S 328 is a 34-foot twin-outboard model in Pursuit’s Sport center console line, with a cabin inside the console. The archived spec sheet lists 34’6″ overall with a 10’10” beam, a 23-inch draft with the motors up, about 12,160 lb dry with twin F300s, 300 gallons of fuel, a 700 hp maximum and 20 degrees of deadrise; Pursuit’s current, reworked S 328 keeps the length and beam. A molded full-beam fiberglass hardtop on powder-coated aft supports has rod storage underneath and a windshield with a powered center vent; HMY adds a power sunshade that extends from the back of the top. There’s a hull-side dive door, bow seats with powered backrests, a console seat, 60/40 helm seating and an entertainment center with sink. Aft are folding transom and aft-facing seats, a 24-gallon livewell, in-floor fishboxes and five transom rod holders. This T-Top cover is patterned for the Pursuit 328 S with its hardtop, and like all of our Pursuit boat covers, it’s cut to this hull rather than a generic 34-foot size chart.
How It Fits the Pursuit 328 S
The cover runs up to the underside of the full-beam hardtop and wraps its supports, so the roof and anything mounted on it stay exposed; retract the sunshade before fitting it. Below the top it takes in the windshield, helm seating and entertainment center, then runs forward over the console seat and bow seating to the stem, falling to the rubrail along the 10’10” beam. Aft, it covers the folding seats and falls as one loose drape over both outboard cowlings, with the lower units exposed. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Earlier and Current S 328
Pursuit lists the reworked S 328 at the same 34’6″ length and 10’10” beam as the earlier boat, but with a taller hardtop clearance (9’0″ versus 8’2″), a different fuel tank and a redesigned deck. Tell us your model year when you order so we can confirm the fit.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the 30-footer, see our Pursuit 288 S T-Top cover; for the largest Sport model we cover, see the Pursuit 358 S T-Top cover.