Robalo 2320 Specifications
- Builder: Robalo Boats, Nashville, Georgia
- Type: Older center console, single or twin outboards
- Length: About 23'
- Beam: About 8'–8'6" (sources differ)
- Dry Weight: About 3,100 lb (one buyer's guide)
- Max Power: 270 hp (one buyer's guide)
- Hull: Deep-V fiberglass
- Cover Shipping Weight: 26 lbs
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
- Coverage: Fits up under the T-top and covers the console, helm seating, foredeck, cockpit and transom, draping over the outboard power
- Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
- Protection: UV-resistant, water-repellent, breathable
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 26 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the older Robalo 2320 center console, the 23-foot boat with a raised foredeck and bow pulpit. These boats are getting on in years and many have had tops, rails or engines changed, so please confirm your model and year and which top you have when you order so we can check the pattern before we cut.
The cover is cut to fit up under a T-top and wrap its legs. If your top was replaced with a non-factory frame, tell us its height and leg spacing when you order so we can check it against the pattern.
Whether your boat has one outboard or two, the cover runs over the transom and falls as one loose drape over the cowling(s); there are no fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Tell us which top your Robalo 2320 has when you order so we can check it against the pattern.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,050.00 · 9oz $1,300.00 · Sunbrella $1,560.00 — your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Robalo 2320 T-Top Boat Cover — Custom-Fit for the Older Robalo 2320 Center Console
Robalo Boats builds its outboard fishing boats in Nashville, Georgia. The 2320 is one of the older Robalo center consoles: a 23-foot deep-V fishing boat that stayed in the line for years before the R-series names took over, and many are still running. Listings give about 23 feet overall with a beam of 8 to 8’6″ depending on the source; one buyer’s guide lists about 3,100 lb dry and a 270 hp maximum. Boats we’ve seen were powered by a single outboard or by twin outboards on the transom. In Sport Fishing’s test, the 2320 had a raised foredeck with a bow rail and an integral pulpit with a roller, seating at the front of the console, a lighted livewell forward of the console, swiveling helm seats, a fold-out transom bench and a larger bait well in the transom, with a sink and shower aft. A factory top was standard on the boat tested. Many owners have since swapped tops, so dimensions vary from boat to boat. This T-Top cover is patterned for the Robalo 2320 with its T-top, and like all of our Robalo boat covers, it’s cut to this hull rather than a generic 23-foot size chart.
How It Fits the Robalo 2320
The cover runs up to the underside of the T-top and wraps its legs, so the top stays exposed. Below it, the cover takes in the console and helm seats, then runs forward over the console seat and the raised foredeck to the bow pulpit, falling to the rubrail along the beam. Aft, it covers the transom bench and bait well and falls as one loose drape over the outboard power, with the lower units exposed. Fold the transom bench away first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Not the Same as the Robalo R230
The newer R230 is also a 23-footer, but it’s a different hull and deck, so the two covers aren’t interchangeable. If you aren’t sure which you own, check the model name on your registration or hull paperwork.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For Robalo’s current 23-footer, see our Robalo 230 R T-Top cover; for a 24-foot Robalo, see the Robalo 240 R T-Top cover.