Scout 210 XSF T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Scout 210 XSF Specifications

  • Builder: Scout Boats, Summerville, South Carolina
  • Type: Center-console fishing boat with forward seating
  • Length Overall: About 21'
  • Beam: 8'4"
  • Draft: About 15"
  • Dry Weight: About 1,980 lb
  • Fuel: 65 gal
  • Deadrise: 19° at transom
  • Power: Single outboard, 150 hp on most boats, 200 hp offered
  • Cover Shipping Weight: 31 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the T-top, wraps the legs, and covers the console, leaning post, console lounge, bow seating, stern bench and outboard cowling; T-top roof stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 31 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's made for the Scout 210 XSF, the 21-foot forward-seating center console with an 8'4" beam, fitted with a T-top. Some of these boats are listed as the 210 Sportfish, so please confirm your model and year when you order so we can check the pattern before we cut.
No. The 215 XSF is a bigger hull with a wider beam, and the 210 Dorado is a dual console; each uses its own pattern.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. The T-top was an option on the 210 XSF, and some boats have a bimini instead. Tell us which top your 210 XSF has when you order so we can check it against the pattern.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $990.00  ·  9oz $1,190.00  ·  Sunbrella $1,460.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Scout 210 XSF T-Top Boat Cover — Custom-Fit for the Scout 210 XSF with T-Top

Scout Boats builds its fiberglass outboard boats at its headquarters near Summerville, South Carolina. The 210 XSF is a 21-foot center console that Scout’s equipment list calls a forward-seating Sportfish: a fishing boat with a lounge, a table and a stern bench for family days. Specs and listings show about 21 feet overall, an 8’4″ beam, a 65-gallon tank, a draft of about 15 inches and a dry weight of about 1,980 lb, on a variable-deadrise hull that finishes at 19 degrees at the transom; most boats carry a single 150 hp outboard. Forward of the console is a cushioned lounge over an insulated fishbox, with a fold-down table in the bow platform. The console has a windshield and grab rail, the leaning post has rod holders, and aft there’s a cushioned bench over a Wave Gate, an aerated baitwell and port and starboard swim platforms. The T-top was an option, with a spreader light, a T-bag and a rocket launcher. This T-Top cover is patterned for the Scout 210 XSF with its T-top, and like all of our Scout boat covers, it’s cut to this hull rather than a generic 21-foot size chart.

How It Fits the Scout 210 XSF

The cover runs up to the underside of the T-top and wraps its legs, so the roof stays exposed. Below the top it takes in the console, windshield and leaning post, then runs forward over the console lounge and bow seating to the stem, falling to the rubrail along the 8’4″ beam; fold the bow table down first. Aft, it covers the stern bench and falls as one loose drape over the outboard cowling, with the lower unit exposed. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Not the Same as the 215 XSF

Scout’s later 215 XSF is a larger boat, about 21’6″ with an 8’6″ beam so it has its own pattern. If you aren’t sure which you own, check the model name on your registration or hull paperwork.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your 210 XSF has no top, see our Scout 210 XSF Center Console cover; for the bigger boat, see the Scout 215 XSF T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })