Sea Chaser 27 HFC T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Sea Chaser 27 HFC Specifications

  • Builder: Carolina Skiff, LLC (Sea Chaser), Waycross, Georgia
  • Type: Bluewater Series HFC center console, single or twin outboards
  • Length: 27'3" (factory); 27'0" (Boating test)
  • Beam: 9'6" (reviews); 116" (factory)
  • Deadrise: 20°
  • Weight: About 5,288–5,438 lb without engines (by source)
  • Fuel: 181–189 gal (by year)
  • Power: Single or twin outboards, up to 500–600 hp (by year)
  • Livewells: 40 gal leaning post + 30 gal port quarter
  • Cover Shipping Weight: 37 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Fits up under the T-top or hardtop and covers the console, leaning post, bow pod, cockpit and transom, draping over the outboard(s)
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 37 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Sea Chaser 27 HFC center console in the Bluewater Series: the 27-foot boat with the raised bow pod, leaning-post livewell and fold-out transom benches. It isn't the 27 HFC DC dual console, so please confirm your model and year and which top you have when you order so we can check the pattern before we cut.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. If your 27 has twin outboards, the cover falls the same way, as one drape over both cowlings with the lower units exposed. Tilt the engine down so the fabric hangs evenly.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Reviews of early boats call the top a hardtop, and current boats list a molded fiberglass T-top; both have supports that rise from the console. Tell us which top your 27 HFC has when you order so we can check it against the pattern.
Outriggers were an option on the 27 HFC. Take them off or fold them down before installing the cover, and tell us if they mount to the top so we can check the fit.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,700.00  ·  9oz $1,925.00  ·  Sunbrella $2,285.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Sea Chaser 27 HFC T-Top Boat Cover — Custom-Fit for the Sea Chaser 27 HFC Bluewater Center Console

Sea Chaser boats are built by Carolina Skiff, LLC in Waycross, Georgia, and HFC stands for Hybrid Fish and Cruise: center consoles laid out for fishing and for family days on the water. The 27 HFC is part of Sea Chaser’s Bluewater Series of bigger offshore center consoles. Sea Chaser lists 27’3″ overall (Boating’s test gave 27’0″), a 116-inch beam (reviews give 9’6″), 189 gallons of fuel and up to 600 hp; Boating lists a single-step hull with 20 degrees of transom deadrise and about 5,288 lb without power. It takes a single or twin outboards; test boats ran a single Suzuki 350. Forward is a raised U-shaped bow pod with loungers over storage and a fish box, plus a fold-up console seat. The step-down console holds an electric head. Aft are a 40-gallon livewell in the leaning post, a 30-gallon livewell in the port quarter and two bench seats that fold out from the transom. Current boats list a molded fiberglass T-top, with supports that rise from the console. This T-Top cover is patterned for the 27 HFC with its T-top, and like all of our Sea Chaser boat covers, it’s cut to this hull rather than a generic 27-foot size chart.

How It Fits the 27 HFC

The cover runs up to the underside of the top and wraps the supports where they rise from the console, so the roof stays exposed. Below it, the cover takes in the console, windshield and leaning post, then runs forward over the folded console seat and the raised bow pod to the stem, falling to the rubrail along the beam. Aft, it covers the folded transom benches and falls as one loose drape over the outboard or twin outboards, with the lower units exposed. Remove the bow table first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Center Console, Not the 27 HFC DC

Sea Chaser also built a 27 HFC DC dual console with a different deck, so this cover is for the center console 27 HFC; if you aren’t sure which you own, check the model name on your registration or hull paperwork.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the smaller HFC, see our 24 HFC T-Top cover; for the biggest Bluewater boat we cover, see the 30 HFC T-Top cover.

Sign up for updates and information about our business