7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
25 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Sea Fox 186 Commander with the T-top: the 18'4" center console with an 8-foot beam and a single outboard. Please confirm your model and year when you order so we can check the pattern before we cut.
No. The 206 Commander is a larger boat with its own console and deck plan, so it uses our 206 Commander T-Top pattern.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Sea Fox offered a canvas T-top with an optional electronics box on the 186 Commander. Tell us which top your 186 Commander has when you order so we can check it against the pattern.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$790.00 · 9oz$975.00 · Sunbrella$1,175.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Sea Fox 186 Commander T-Top Boat Cover — Custom-Fit for the Sea Fox 186 Commander Center Console
Sea Fox Boats is based in Moncks Corner, South Carolina. The 186 Commander was the smallest boat in its Commander center-console line, with spec sheets and listings for model years 2015 through 2020; the current Commander range starts at the 228. Sea Fox lists an 18’4″ centerline length, an 8-foot beam, a 19-degree deadrise (18 degrees on a later spec sheet), a 14-inch hull draft, about 2,200 lb dry, 50 to 52 gallons of fuel and a 150 hp maximum. The bow has storage and seating with curved backrests, the console has a windscreen and a side door to a portable toilet, and behind the leaning post sits an aerated livewell between two flip-up jump seats. The factory T-top was an option with canvas, LED spreader lights and an electronics box; Sea Fox gives a 7’1″ bridge clearance with it. This T-Top cover is patterned for the Sea Fox 186 Commander with its T-top, and like all of our Sea Fox boat covers, it’s cut to this hull rather than a generic 18-foot size chart.
How It Fits the Sea Fox 186 Commander
The cover runs up to the underside of the T-top and wraps its legs, so the roof and spreader lights stay exposed. Below the top it takes in the console, windscreen and leaning post, then runs forward over the bow seating to the stem, falling to the rubrail along the 8-foot beam. Aft, it covers the jump seats and livewell and falls as one loose drape over the outboard cowling, with the lower unit exposed below the hem. Fold the jump seats down and take out the bow backrests first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
T-Top or No Top?
This pattern is for a 186 Commander with the T-top. If your boat has no top, or only a Bimini, our 186 Center Console cover is the one to order; if you aren’t sure which model you own, check the model name on your registration or hull paperwork.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For a 186 without the T-top, see our Sea Fox 186 Center Console cover; for Sea Fox’s smaller 17’8″ bay boat, see the Sea Fox 185 T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.