7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
33 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Sea Fox 236 center console (236CC Pro Series) with a T-top: the 23'3" hull with an 8'6" beam. The 236 WA walkaround and the 237 have their own pages, so please confirm your model and year and which top you have when you order so we can check the pattern before we cut.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Sea Fox offered a T-top or a deluxe T-top/finished hard top on the 236 center console. Tell us which top your Sea Fox 236 has when you order so we can check it against the pattern.
The cover stops at the underside of the top, so an electronics box mounted under it is covered and anything on the roof stays outside. Take outrigger poles off before covering, and tell us about them when you order so we can check the fit.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$1,050.00 · 9oz$1,300.00 · Sunbrella$1,560.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Sea Fox 236 T-Top Boat Cover — Custom-Fit for the Sea Fox 236 Center Console
Sea Fox Boat Company builds its saltwater boats in Moncks Corner, South Carolina. The 236 center console, later listed as the 236CC Pro Series, was a 23-foot fishing boat in Sea Fox’s earlier lineup, sold alongside a 236 walkaround and a 236 dual console on the same length and beam. These boats were built with a 23’3″ centerline length, an 8’6″ beam, a 19-degree deadrise and a 14-inch hull draft, weigh about 2,800 lb dry and carry 101 gallons of fuel, with a single outboard of up to 250 hp. The deluxe console holds a portable toilet, with a seat with a backrest and storage in front of it, a bow fishbox and anchor locker forward, and a recessed bow grab rail. Two pedestal seats were standard and a leaning post with a cooler was an option; aft are two jump seats, a 40-gallon aerated livewell and a Euro transom with two walk-through gates. The T-top was an option, with a deluxe T-top or finished hard top as the upgrade, plus outriggers and spreader lights. This T-Top cover is patterned for the Sea Fox 236 with its T-top, and like all of our Sea Fox boat covers, it’s cut to this hull rather than a generic 23-foot size chart.
How It Fits the Sea Fox 236
The cover runs up to the underside of the T-top and wraps its frame legs, so the top stays exposed. Below it, the cover takes in the console, windscreen and leaning post or pedestal seats, then runs forward over the console seat and bow fishbox to the stem, falling to the rubrail along the 8’6″ beam. Aft, it covers the jump seats and the Euro transom and falls as one loose drape over the outboard, with the lower unit exposed. Take off outriggers first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Not the Same as the 236 WA or 237
Sea Fox’s 236 walkaround has a cabin forward, and the 237 is a different 23-foot center console, so each has its own cover. If you aren’t sure which you own, check the model name on your registration or hull paperwork.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the cabin version of this hull, see our Sea Fox 236 WA T-Top cover; for the other 23-foot center console, see the Sea Fox 237 T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.