7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
38 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Sea Fox 286 center console, sold as the 286CC Pro Series and the 286 Commander: the 28-foot hull with a 9'8" beam and a hard top. It isn't cut for the 287 or the 288 Commander, so please confirm your model and year and which top you have when you order so we can check the pattern before we cut.
Either way, the cover runs over the transom and falls as one loose drape over the outboard cowlings; there are no fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. The factory sheet lists Sea Fox's Ultima hard top as standard on the 286, and some boats are listed with a T-top. Tell us which top your 286 has when you order so we can check it against the pattern.
Both names are used for Sea Fox's 28-foot, 9'8"-beam center console, so this is the page for either. Send your year with your order, since equipment changed over the run, and we'll check it against the pattern.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$1,800.00 · 9oz$2,040.00 · Sunbrella$2,425.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Sea Fox 286 T-Top Boat Cover — Custom-Fit for the Sea Fox 286 Center Console
Sea Fox Boat Company builds its saltwater boats in Moncks Corner, South Carolina. The 286 was Sea Fox’s 28-foot center console, sold first as the 286CC Pro Series and later under the 286 Commander name. The factory sheet lists a 28-foot centerline length, a 9’8″ beam, a 21-degree deadrise, a 20-inch hull draft, a dry weight of about 5,000 lb and 200 gallons of fuel, with twin outboards and room for 10 people; maximum power is listed at 500 hp on the factory sheet and 600 hp in later sources. Up front are bow seating with curved backrests and two bucket seats on the console front, and the walk-in console holds a toilet and sink. The helm pod carries two captain’s chairs with flip-up bolsters, with a 40-gallon aerated livewell behind and insulated in-deck fishboxes, and the Euro transom has flip-up backrests. Sea Fox’s Ultima hard top, with an electronics box and rod holders, is standard on the factory sheet, with about 8’4″ of bridge clearance. This T-Top cover is patterned for the Sea Fox 286 with its Ultima hard top, and like all of our Sea Fox boat covers, it’s cut to this hull rather than a generic 28-foot size chart.
How It Fits the 286
The cover runs up to the underside of the hard top and wraps its frame, so the roof stays exposed. Below it, the cover takes in the console, windshield and helm seats, then runs forward over the console seats and bow seating to the stem, falling to the rubrail along the 9’8″ beam. Aft, it covers the livewell and Euro transom and falls as one loose drape over the twin outboards, with the lower units exposed. Take off any outrigger poles first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
286, 287 or 288?
Sea Fox also built a 287 center console listed at the same 28-foot length and 9’8″ beam, and the 288 Commander is a newer 28-footer; each has its own cover on our site. If you aren’t sure which you own, check the model name on your registration or hull paperwork.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the newer 28-footer, see our Sea Fox 288 Commander T-Top cover; for the 287, see the Sea Fox 287 T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.