Sea Fox 288 Traveler T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Sea Fox 288 Traveler Specifications

  • Builder: Sea Fox Boat Company, Moncks Corner, South Carolina
  • Type: Dual console (Traveler series), twin outboards
  • Length: 28'
  • Beam: 9'8"
  • Deadrise: 18° at the transom
  • Dry Weight: 8,610 lb (published)
  • Fuel: 147 gal
  • Draft: 1'6"
  • Bridge Clearance: About 8'4" with the hard top
  • Power: Twin Yamaha 300 hp outboards
  • Cover Shipping Weight: 41 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Fits up under the Ultima hard top and covers both consoles, the windshield, bow seating, cockpit and transom, draping over the twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 41 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Sea Fox 288 Traveler dual console with the Ultima hard top: the 28-foot hull with a 9'8" beam and twin outboards. The 288 Commander center console and the smaller 268 Traveler have their own pages, so please confirm your model and year and which top you have when you order so we can check the pattern before we cut.
T-Top and Center Console are the names of our two cover styles, not boat types. The T-Top style is for any boat with a hard top, whether it's a T-top, a hardtop or an arch-mounted top, so it's the right style for a Traveler with the Ultima hard top.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. The 288 Traveler comes with Sea Fox's Ultima hard top as standard. Tell us which top your 288 Traveler has when you order so we can check it against the pattern.
The cover runs aft over the transom and falls as one loose drape over both outboard cowlings; there are no separate fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,415.00  ·  9oz $2,625.00  ·  Sunbrella $3,080.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Sea Fox 288 Traveler T-Top Boat Cover — Custom-Fit for the Sea Fox 288 Traveler Dual Console with Hard Top

Sea Fox Boat Company builds its saltwater boats in Moncks Corner, South Carolina. The 288 Traveler is Sea Fox’s 28-foot dual console, a family boat with fishing gear built in, and it’s the big brother to the 268 Traveler. Sea Fox lists a 28-foot length, a 9’8″ beam, an 18-inch draft, an 18-degree deadrise at the transom, about 8’4″ of bridge clearance and 147 gallons of fuel, with a published dry weight of 8,610 lb; twin Yamaha 300s are the standard power. Forward of the walk-through windshield is deep bow seating with aft-facing backrests and an adjustable table that fills in to a sun pad; the port console opens to a head with a porcelain toilet. In the cockpit are a back-to-back seating pod with bucket chairs and an aft bench, plus a 30-gallon aquarium-style livewell on the port side of the transom and a port dive door. Sea Fox’s Ultima hard top is standard, with a full glass windshield and outrigger brackets. This T-Top cover is patterned for the Sea Fox 288 Traveler with its Ultima hard top, and like all of our Sea Fox boat covers, it’s cut to this hull rather than a generic 28-foot size chart.

How It Fits the 288 Traveler

The cover runs up to the underside of the hard top and wraps its frame, so the roof stays exposed. Below it, the cover takes in both consoles and the windshield, then runs forward over the bow seating to the stem, falling to the rubrail along the 9’8″ beam. Aft, it covers the seating pod, bench and livewell and falls as one loose drape over the twin outboards, with the lower units exposed. Lower the bow table and take off any outrigger poles first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

A T-Top Cover for a Dual Console

Our T-Top covers fit any hard top, not only a center console’s T-top. Because the 288 Traveler has the Ultima hard top, this style is the right one: it fits up under the top and covers everything below it.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the smaller Traveler, see our Sea Fox 268 Traveler T-Top cover; for the center console on the same beam, see the Sea Fox 288 Commander T-Top cover.

Sign up for updates and information about our business