7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
31 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Sea Pro 219 center console from Whitmire, South Carolina: 21'9" with an 8'6" beam, a single outboard and a T-top. It isn't for the older Sea Pro 220, which is a different hull. Please confirm your model and year and which top you have when you order so we can check the pattern before we cut.
Dealer specs list both at 21'9" with an 8'6" beam, 85 gallons of fuel and 17.5 degrees of deadrise, but we keep a separate pattern for each. If your boat is a 222, order from the 222 page; if you aren't sure which you own, check the model name and length on your registration or hull paperwork.
The cover runs aft over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Sea Pro offered the 219 with an optional fiberglass T-top. Tell us which top your 219 has when you order so we can check it against the pattern.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$990.00 · 9oz$1,190.00 · Sunbrella$1,460.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Sea Pro 219 T-Top Boat Cover — Custom-Fit for the Sea Pro 219 Center Console
Sea Pro Boats builds its center consoles and bay boats in Whitmire, South Carolina. The 219, also listed as the 219 Deep-V, is a single-outboard center console built after the brand’s relaunch, with seating for nine and a fishing layout. It’s 21’9″ long with an 8’6″ beam, a 14-inch draft, 17.5 degrees of deadrise at the transom and 85 gallons of fuel, and dealer specs rate it for up to 250 hp. BoatTest describes a hand-laid fiberglass hull with a composite transom. Up front, bow seating with backrests has storage under each seat and a stainless grab rail around the bow. The console carries the helm, electronics and storage, with a leaning post with rod holders behind it, a 52-inch folding rear bench seat, a pressurized 30-gallon transom livewell, two 120-quart fish boxes and a 90-quart cooler. The fiberglass T-top was an option, so many 219s have one and some don’t. This T-Top cover is patterned for the Sea Pro 219 with its T-top, and like all of our Sea Pro boat covers, it’s cut to this hull rather than a generic 22-foot size chart.
How It Fits the Sea Pro 219
The cover runs up to the underside of the T-top and wraps its legs, so the roof stays exposed. Below it, the cover takes in the console, windshield and leaning post, then runs forward over the bow seating and grab rail to the stem, falling to the rubrail along the 8’6″ beam. Aft, it covers the folding bench and transom livewell, then falls as one loose drape over the outboard cowling, with the lower unit exposed. Fold the rear bench down and pull rods from the leaning post before you put it on. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For Sea Pro’s 222, which has the same published 21’9″ by 8’6″ dimensions, see our Sea Pro 222 T-Top cover; for the older, earlier-generation 22-footer, see the Sea Pro 220 T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.