Skeeter 240 SX T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Skeeter 240 SX Specifications

  • Builder: Skeeter Boats, Kilgore, Texas
  • Type: Bay boat, single outboard
  • Length: 24'1"
  • Beam: 8'5"
  • Draft: About 15"
  • Weight: About 2,925 lb
  • Fuel: 75 gal
  • Power: Single outboard, 300 hp max
  • Livewells: 40 gal rear, 14 gal console
  • Cover Shipping Weight: 34 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Fits up under the T-top and covers the console, leaning post, front deck and rear casting deck, draping over the outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 34 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Skeeter SX240, the 24'1" bay boat with an 8'5" beam, with a T-top and a single outboard. Skeeter offered several T-tops for this boat, so please confirm your model and your top when you order so we can check the pattern before we cut.
They are two cover styles for the same boat. The T-Top cover fits up under a T-top or hardtop and wraps its supports, leaving the roof exposed. The Center Console cover is for a boat with no top and covers the entire boat, console, windshield and engine included. Order the style that matches your boat as it sits.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Tell us which top your SX240 has when you order so we can check it against the pattern.
The cover runs aft over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. The SX240 was built for a single outboard of up to 300 hp. Tilt the engine down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,200.00  ·  9oz $1,490.00  ·  Sunbrella $1,775.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Skeeter 240 SX T-Top Boat Cover — Custom-Fit for the Skeeter SX240 Bay Boat With a T-Top

Skeeter builds its boats in Kilgore, Texas. Founder Holmes Thurmond built the first Skeeter in 1948, and Yamaha has owned the company since 1996. The SX boats are Skeeter’s saltwater bay boat line. The SX240 was a 24’1″ bay boat with an 8’5″ beam, a draft of about 15 inches, a standard weight of about 2,925 lb and 75 gallons of fuel, rated for a single outboard of up to 300 hp. Skeeter’s equipment list included a rear casting deck with a 40-gallon livewell, a 14-gallon console baitwell, front deck storage, a console cushion with backrest, hideaway rear jump seats and trolling motor wiring, with a leaning post, Power-Poles and several T-tops offered as options. This T-Top cover is patterned for the Skeeter SX240 with its T-top, and like all of our Skeeter boat covers, it’s cut to this hull rather than a generic 24-foot size chart.

How It Fits the Skeeter SX240

The cover runs up to the underside of the T-top and wraps its legs, so the roof stays exposed. Below it, the cover takes in the console, windshield and leaning post, then runs over the console seat and front deck to the bow, falling to the rubrail along the 8’5″ beam. Aft, it covers the rear casting deck and jump seats, then falls as one loose drape over the outboard cowling, with the lower unit exposed; tilt the engine down first. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

T-Top or Center Console Cover?

We sell two cover styles for Skeeter’s 24-foot SX hull. This T-Top style is for a boat with a T-top or other hard top. If yours has no top, choose the Center Console style, which covers the whole boat.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For a 240 with no top, see our Skeeter 240 Center Console cover, or for the 24’6″ SX, our Skeeter 2550 SX T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })