Sportsman 322 Open — Quick-Reference Specs
- Boat Model: Sportsman 322 Open
- Cover Type: T-Top Boat Cover
- LOA: 32'2"
- Beam: 10'10"
- Dry Weight: 9,185 lbs
- Engine: Triple outboard, max 900 HP total
- Fuel Capacity: 330 gallons
- Deadrise: 23°
- Draft: 24"
- Hull Type: Deep-V fiberglass, SportTech® no-wood all-fiberglass construction
- Status: Current production
Cover Features
- Fit: Custom-fitted T-Top cover for the Sportsman 322 Open
- Coverage: Full hull below the T-Top — hardtop remains exposed
- T-Top Integration: Fitted cutouts for T-Top support legs
- Fabric Options: 9oz solution-dyed polyester (most popular) or Sunbrella acrylic
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Installation: ~30–35 minutes, two people recommended
- Warranty: Manufacturer warranty against UV and weather damage
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 47 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
Yes — this cover is pattern-cut specifically for the Sportsman 322 Open T-top configuration. It fits the 32-foot-2-inch length with 10-foot-10-inch beam, attaching at the T-top roof frame and enclosing the entire boat and all three outboard engines as one continuous piece.
Yes — the 322 Open is a current production model in Sportsman's Open series. It features NMMA Yacht Certification, SportTech no-wood construction, triple-engine capability up to 900 total horsepower, and a 10-year structural hull warranty. Our cover fits every model year.
Our cover wraps all three outboard engines as one continuous piece of fabric. The fabric extends past the transom and gathers naturally around all three engine cowlings in a loose drape, with no separate engine boots or multi-piece assemblies required. Only the lower unit shafts extend below.
Absolutely. Our cover is engineered with extra-wide panels and reinforced attachment points to handle the 322's 10-foot-10-inch beam and substantial hull surface area. Both our 9oz polyester and Sunbrella fabrics are rated for years of continuous outdoor exposure in marine environments.
We offer two marine-grade fabrics: our heavy-duty 9oz solution-dyed polyester — the most popular choice for durability and colorfastness — and premium Sunbrella acrylic, which is lighter with exceptional UV resistance and breathability. Both resist mold, mildew, and fading through years of coastal exposure.
Installation takes about 30 to 35 minutes with two people. Start by draping the cover over the T-top roof frame, then pull the fabric panels down on all sides. The triple-engine transom requires pulling the rear fabric down as one continuous gathered drape over all three cowlings. Secure using the included adjustable tie-down straps.
Yes — our cover completely encloses the entire cockpit area including the Sileather upholstery, enclosed head compartment, console, electronics, and all deck hardware. Only the flat fiberglass T-top roof panel remains visible, protecting every interior surface from UV, rain, salt, and debris.
A T-top mooring cover is a one-piece fitted cover that attaches at the T-top roof frame and wraps down to enclose the entire boat while in storage. It shields the console, seating, deck hardware, electronics, and T-top structure from UV damage, rain, bird droppings, pollen, and debris — extending the life of every component.
Our 9oz solution-dyed polyester is the most popular choice — it is heavier, extremely durable, and offers excellent water resistance at a lower price point. Sunbrella acrylic is lighter, more breathable, and provides superior UV protection, making it ideal for boats stored in intense sun year-round. Both fabrics come with manufacturer warranties.
Select your boat model, cover type, and fabric choice on the product page, then add to cart. Every cover ships with the fitted cover, all necessary tie-down straps and buckles, a storage bag, and a detailed installation guide. Most orders ship within 5 to 7 business days.
Sportsman 322 Open T-Top Boat Cover (Current Production Model)
The Sportsman 322 Open is a 32-foot-2-inch center console with a 10-foot-10-inch beam and a dry weight of 9,185 pounds. Powered by triple outboards up to 900 total horsepower with 330 gallons of fuel capacity, this deep-V hull delivers 23 degrees of deadrise at the transom — one of the sharpest entries in the offshore center console market — for an exceptionally smooth, dry ride in rough bluewater conditions. The 322 Open is NMMA Yacht Certified with SportTech no-wood, all-fiberglass construction, a 10-year structural hull warranty, VACS attitude control, Sileather upholstery, an enclosed head, and the fishing amenities that tournament-level anglers require. At over 32 feet with triple engines, this is a serious offshore platform.
Our custom-fitted T-top mooring cover wraps the entire 322 Open as one continuous piece of solution-dyed marine fabric. The fabric attaches at the underside edges of the T-top roof frame and hangs down like curtain panels — angling forward toward the bow and rearward past the transom to fully enclose all three outboard engines in a natural, gathered drape. All four T-top support legs disappear completely inside the fabric, leaving only the flat fiberglass roof panel visible at the top like a low hat. The cover bottom edge extends well below the chine, with the hem sitting level with the top of the trailer tires.
Triple-Engine Bluewater — Premium Boat, Premium Protection
The 322 Open represents a six-figure investment in offshore fishing capability — triple engines, NMMA Yacht Certification, Sileather upholstery, an enclosed head, and 330 gallons of fuel for extended canyon runs. Every surface on this boat is premium and deserves matching protection. Choose our heavy-duty 9oz solution-dyed polyester — the most popular option among boat owners for its exceptional durability and colorfastness — or upgrade to premium Sunbrella acrylic for superior UV resistance and breathability. Both fabrics are solution-dyed through the entire fiber, locking in color permanently against mold, mildew, and fading.
32-Foot Platform, One-Piece Engineering
Installation on the 322 Open takes about 30 to 35 minutes with two people. The cover ships with all necessary tie-down straps, buckles, and hardware plus a detailed installation guide. The triple-engine transom is handled as one continuous gathered drape — no separate engine covers or multi-piece assemblies. Adjustable straps secure under the hull and connect to the lift or cradle, holding the 10-foot-10-inch beam securely through sustained offshore weather conditions.
Explore More Sportsman Open Covers
Browse our complete T-top boat cover collection for covers across every brand and hull size. Looking for the flagship Open series model? See our Sportsman 352 Open T-top cover for a 35-foot quad-engine platform with 1,275 total horsepower. Also available is our Sportsman 312 Open T-top cover for a 31-foot twin-engine offshore platform.
Reviews
There are no reviews yet.