7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
37 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Tidewater 272 CC Adventure: 27'2" with a 9'8" beam, a fiberglass T-top and twin outboards. Please confirm your model, your top and your stern seating when you order so we can check the pattern before we cut.
The 272 LXF is built on the same 27'2" hull, but Tidewater fits it with a fixed stern bench instead of the Adventure's fold-down rear seat, and we sell it as a separate cover. If you aren't sure which you own, check the model name on your registration or hull paperwork.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Tidewater fits the 272 with a fiberglass T-top and a full glass enclosure as standard. Tell us which top your 272 Adventure has when you order so we can check it against the pattern.
The cover runs aft over the transom and falls as one loose drape over both outboard cowlings; there are no separate engine pockets, and the lower units stay exposed below the hem. Tidewater rigs the 272 with twin 200s as standard and allows up to 500 hp. Tilt the engines down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$1,700.00 · 9oz$1,925.00 · Sunbrella$2,285.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Tidewater 272 Adventure T-Top Boat Cover — Custom-Fit for the Tidewater 272 CC Adventure
Tidewater Boats was founded in 2006 by Chris Martin and Jimmy Metts and builds saltwater center consoles and bay boats in Lexington, South Carolina. The 272 CC Adventure is the 27-foot center console in its Adventure line. Tidewater lists it at 27’2″ on centerline with a 9’8″ beam, 5,500 lb without engines, 178 gallons of fuel, 21 degrees of deadrise and a 500 hp maximum, with twin 200 hp outboards as standard; listings show 180 gallons on some boats. The layout has port and starboard bow cushions with a backrest and bolsters, an electric bow table, a console with a head, a drop-bolster leaning post, a fold-down rear seat, a 28-gallon livewell, a dive door and a fiberglass T-top with a full glass enclosure. This T-Top cover is patterned for the Tidewater 272 CC Adventure with its fiberglass T-top, and like all of our Tidewater boat covers, it’s cut to this hull rather than a generic 27-foot size chart.
How It Fits the 272 CC Adventure
The cover fits up under the fiberglass T-top and wraps its frame and the glass enclosure at the helm, so the roof stays exposed. Below it, the cover takes in the console and leaning post, then runs forward over the bow seating to the bow, falling to the rubrail along the 9’8″ beam. Aft, it covers the rear seat and transom, then falls as one loose drape over the twin outboards, with the lower units exposed; tilt them down first. Lower the bow table and take the cushions off before you put it on. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the LXF on this hull, see our Tidewater 272 LXF T-Top cover, or for the next size up, our Tidewater 282 Adventure T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.