Tidewater 280 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Tidewater 280 Specifications

  • Builder: Tidewater Boats, Lexington, South Carolina
  • Type: Center console (Adventure line), twin outboards
  • Length: About 28'4" overall
  • Beam: 9'10"
  • Dry Weight: About 5,800 lb
  • Fuel: 205 gal
  • Deadrise: 22° at transom
  • Power: Twin outboards, 600 hp max on listings seen
  • Cover Shipping Weight: 38 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Fits up under the hard top and covers the console, leaning post, bow seating, cockpit and transom, draping over the twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 38 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Tidewater 280 CC Adventure: about 28'4" with a 9'10" beam, a hard top and twin outboards. Please confirm your model and your top when you order so we can check the pattern before we cut.
The 282 CC that followed it has similar length and beam, but it is a newer design with its own seating and top, so we sell it as a separate cover. If you aren't sure which you own, check the model name on your registration or hull paperwork.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Listings for the 280 describe both a hard top and a T-top recessed into the console. Tell us which top your 280 Adventure has when you order so we can check it against the pattern.
The cover runs aft over the transom and falls as one loose drape over both outboard cowlings; there are no separate engine pockets, and the lower units stay exposed below the hem. The 280s we found ran twin 250 or 300 hp outboards. Tilt the engines down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,800.00  ·  9oz $2,040.00  ·  Sunbrella $2,425.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Tidewater 280 T-Top Boat Cover — Custom-Fit for the Tidewater 280 CC Adventure

Tidewater Boats was founded in 2006 by Chris Martin and Jimmy Metts and builds saltwater center consoles and bay boats in Lexington, South Carolina. The 280 CC Adventure was its 28-foot twin-outboard center console; it is not in the current lineup, where the 282 CC holds that size. Dealer listings put these boats at about 28’4″ overall with a 9’10” beam, a dry weight of about 5,800 lb, 205 gallons of fuel and 22 degrees of deadrise at the transom, rated for up to 600 hp, with twin 250 or 300 hp outboards on the boats we saw. The layout has wrap-around bow seating with flip-out backrests, a seat ahead of the console, a console with a head, sink and shower, a yacht-style helm, a leaning post with a tackle center, sink and 30-gallon livewell, a flush transom seat, recessed rod racks and a hard top with spreader lights. This T-Top cover is patterned for the Tidewater 280 CC Adventure with its hard top, and like all of our Tidewater boat covers, it’s cut to this hull rather than a generic 28-foot size chart.

How It Fits the 280 CC Adventure

The cover runs up to the underside of the hard top and wraps its frame, so the roof and its lights stay exposed. Below it, the cover takes in the console, windshield and leaning post, then runs forward over the console seat and bow seating to the bow, falling to the rubrail along the 9’10” beam. Aft, it covers the transom seat, then falls as one loose drape over the twin outboards, with the lower units exposed; tilt them down first. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the newer 28-footer, see our Tidewater 282 Adventure T-Top cover, or for the next size up, our Tidewater 292 Adventure T-Top cover.

Sign up for updates and information about our business