Triton 260 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Triton 260 Specifications

  • Builder: Triton Boats (founded 1996 by Earl Bentz)
  • Type: Bay boat, single outboard
  • Length: 25'5"
  • Beam: 8'6"
  • Draft: 13"
  • Deadrise: 15°
  • Hull Weight: About 2,650 lb
  • Fuel: 73–96 gal (sources vary)
  • Power: Single outboard, up to 400 hp
  • Cover Shipping Weight: 36 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Fits up under the T-top or hardtop and covers the console, leaning post, casting decks and transom, draping over the outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 36 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Triton 260 LTS Pro, the 25'5" bay boat with an 8'6" beam, with a T-top or hardtop and a single outboard. Please confirm your model and model year when you order so we can check it against the pattern before we cut.
No. This cover is for the 260 built by Triton Boats. Sea Hunt also builds a Triton series of center consoles, which are different boats from a different builder, and we list those covers under Sea Hunt. If you aren't sure which you own, check the model name and length on your registration or hull paperwork.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Triton offered both a T-top and a fiberglass hardtop on this boat. Tell us which top your 260 LTS Pro has when you order so we can check it against the pattern.
The cover runs aft over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. The 260 LTS Pro was built for a single outboard on a jack plate. Tilt the engine down so the fabric hangs evenly.
If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,550.00  ·  9oz $1,750.00  ·  Sunbrella $2,080.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Triton 260 T-Top Boat Cover — Custom-Fit for the Triton 260 LTS Pro Bay Boat

Earl Bentz founded Triton Boats in 1996 and built its fiberglass boats in Ashland City, Tennessee. Brunswick owned Triton from 2005 to 2010, when it sold the brand to Fishing Holdings, a Platinum Equity affiliate, and fiberglass production moved to Flippin, Arkansas. Alongside its bass boats, Triton built a saltwater line of center consoles and bay boats. The 260 LTS Pro was the largest bay boat in its LTS line, built on what Florida Sportsman called an all-new hull with lots of bow flare, chines extended an extra inch and a half per side and a bass-boat-style running pad. It measures 25’5″ with an 8’6″ beam, a 13-inch draft and 15 degrees of deadrise, weighs about 2,650 lb and takes a single outboard of up to 400 hp on a standard hydraulic jack plate. The bow casting deck is huge, with insulated fish boxes and locking rod boxes, and aft there is a 60-gallon release well and a 25-gallon bait well, with a leaning post, a 10-rod console and electric trim tabs. This T-Top cover is patterned for the Triton 260 LTS Pro with its T-top or hardtop, and like all of our Triton boat covers, it’s cut to this hull rather than a generic 26-foot size chart.

How It Fits the 260 LTS Pro

The cover runs up to the underside of the top and wraps its legs, so the roof stays exposed. Below it, the cover takes in the console, windshield and leaning post, then runs forward over the big casting deck to the stem, falling to the rubrail along the 8’6″ beam. Aft, it covers the rear deck and well lids, then falls as one loose drape over the outboard cowling, with the lower unit exposed; tilt the engine down first. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For Triton’s 24-foot bay boat, see our Triton 240 LTS T-Top cover.

Sign up for updates and information about our business