7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
22 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
Center Console is our name for the full-coverage style made for boats without a T-top or hardtop: it covers the whole boat from bow to stern and rubrail to rubrail, windshield and outboard included. This one is patterned for the 158. If a T-top has been added to your boat, contact us before ordering.
It's patterned for the EdgeWater 158CC, sold for about the 2011 to 2013 model years. If your boat is the later 158CS, contact us with a photo before ordering.
No. The 155CC from the late 1990s and early 2000s shares the 6'7" beam but has a different deck and console layout, and our EdgeWater 155 cover has its own pattern.
No. The cover goes over the forward console seat, cooler seat and pedestal seats. Lower adjustable pedestals and take loose items off the deck so the cover can lie smoothly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$625.00 · Sunbrella$785.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Edgewater 158 Center Console Boat Cover — Custom-Fit for EdgeWater’s 15-Foot Console Fishing Boat
The 158CC is EdgeWater Power Boats’ compact console boat from the early 2010s, listed in price guides for the 2011 through 2013 model years before the 158CS name took over. Spec listings give it a 6’7″ beam, about 10 inches of draft, an overall length of about 15’2″, a built-in fuel tank, a maximum load of 1,140 lb and room for five, with outboard options up to 90 hp. EdgeWater’s own catalog page lays out a lot of boat for the size: a bow casting deck with a cushion and a forward console seat, an insulated bow storage locker, a console with helm, compass and drink holders, a swingback cooler seat holding a 54-quart cooler, two deluxe pedestal seats, quarter seating around the aft motor well, and a swim platform with ladder. The deep-V hull uses EdgeWater’s wood-free Permagrid II stringer system with closed-cell foam. This full cover is patterned for that layout, and like all of our Edgewater boat covers, it’s cut to this hull rather than a generic 15-foot size chart.
How It Fits the EdgeWater 158
The cover peaks over the console, then slopes forward over the forward console seat and casting deck and aft over the cooler seat, pedestal seats and quarter seating to the rubrail, so rain runs off instead of pooling on the cushions. It continues past the motor well and swim platform to wrap the outboard in one piece. Trim the outboard all the way down before covering — the pattern is cut to fit best that way — and remove a bow-mount trolling motor if you run one. Lower the pedestal seats if yours are adjustable. On a 6’7″ beam, one person can cover it in a few minutes. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
158CC, 158CS or 155?
EdgeWater has used similar numbers on several small boats: the older 155CC, this 158CC, and the later 158CS. This pattern is cut for the 158CC. If your boat is a 158CS, send us a photo of the layout and we’ll confirm the fit before your cover is cut.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the older 15-foot model, see the EdgeWater 155 cover; for the next size up, the EdgeWater 170 cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.