Cast & Blast 22 Kings Bay T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Cast & Blast 22 Kings Bay Specifications

  • Builder: Cast and Blast Boats (Charleston, SC)
  • Length: 22'
  • Beam: About 8'6" (2.59 m, per a resale listing)
  • Hull: Aluminum
  • Layout: Center console bay boat with T-top
  • Power: Single outboard (seen with a Suzuki 200 hp)
  • Model Years Seen: 2018–2019 (resale listings)
  • Cover Shipping Weight: 32 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs to the underside of the T-top, wraps the frame legs, and covers the console, deck, cockpit and single outboard in one piece; T-top roof stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 32 lbs
Materials

8 Oz, 9 Oz

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Cast & Blast Kings Bay 22 — the 22-foot aluminum center console bay boat built by Cast and Blast Boats in Charleston, South Carolina — with a T-top. The boats we have seen listed are 2018 and 2019 models. If your boat is a different year or has been heavily customized, measure your length and beam and contact us before ordering.
No. The 17 Flats is a 17-foot skiff with a 72-inch beam and a different layout. For that boat, see our Cast & Blast 17 Flats Center Console cover.
No. The cover runs up to the underside of the T-top and wraps around the frame legs; the T-top roof stays exposed. Everything below it — console, seating, deck and outboard — is covered.
The cover is patterned for a standard center-console T-top layout. A poling platform over the outboard or a non-standard tower changes the shape the cover has to clear, so contact us with photos before ordering.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,015.00  ·  9oz $1,240.00  ·  Sunbrella $1,500.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Cast & Blast 22 Kings Bay T-Top Boat Cover — Custom-Fit for the 22-Foot Aluminum Bay Boat

The Cast & Blast 22 Kings Bay is the 22-foot aluminum bay boat from Cast and Blast Boats of Charleston, South Carolina — the small Lowcountry builder founded by aluminum fabricator Brooks Oswald, best known for its welded-aluminum 17CC flats skiff. Local anglers reported in early 2017 that Oswald had a 22-foot aluminum bay boat prototyped, and the Kings Bay 22 boats we have seen on the resale market are 2018 and 2019 models. Cast and Blast does not publish a spec sheet for the 22 on its current website, so the figures here come from used-boat listings: 22 feet long, a beam of about 8’6″ (listed as 2.59 m), an aluminum hull, and a single outboard — one 2019 boat was rigged with a Suzuki 200 hp. It is a center console layout, with the console amidships, open fishing room forward and a cockpit aft to the transom-mounted engine. This T-Top cover is patterned for the Cast & Blast 22 Kings Bay with its T-top, and like all of our Cast & Blast boat covers, it’s cut to this hull rather than a generic 22-foot size chart.

How It Fits the Cast & Blast 22 Kings Bay

The cover runs up to the underside of the T-top and is cut to wrap around the frame legs, so the T-top roof stays exposed while everything below it is covered. From there it drapes over the console, helm seating and leaning post, out to the gunwales, forward over the bow deck, and aft over the cockpit and the single outboard as one piece. Because an 8’6″ beam is full width for a 22-footer, the pattern follows that beam down to the rubrail instead of relying on stretch the way a universal bay-boat cover does. Kings Bay boats were built in small numbers and many are rigged to the owner’s order, so if your T-top frame, poling platform, or tower is different from a standard center-console T-top, contact us before ordering. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Not the Same as the 17 Flats

Cast and Blast’s better-known boat is the 17-foot flats skiff, a much smaller, narrower hull (17 feet with a 72-inch beam) that is normally run without a T-top. Our two Cast & Blast patterns are not interchangeable — check the length on your hull or registration before ordering.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If you also run the builder’s smaller skiff, see our Cast & Blast 17 Flats Center Console cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })