Custom Fit Boat Covers for Cast and Blast Boats
Our Cast & Blast boat covers are custom-patterned for your exact model — built for these all-welded aluminum fishing-and-hunting boats. Cast & Blast builds rugged aluminum hybrid boats in Charleston, South Carolina, designed to do double duty for inshore fishing and duck hunting. Because the big national cover makers don’t have a pattern for this niche aluminum boat, a true custom-fit cover is the only way to get it right. Ours follows your boat’s exact lines. Every cover is made in the USA from marine-grade, water-repellent fabric.
Cast & Blast Models We Cover
T-Tops: 22 Kings Bay
Cast & Blast Boat Cover Features and Benefits
Every Cast & Blast cover is custom-patterned to your exact model — the 17 flats skiff or the 22 Kings Bay center console, with or without a T-top — so it fits without flapping or pooling.
Built from marine-grade, UV-resistant fabric, our covers stand up to the sun, salt, and marsh humidity these boats run in — resisting fading, mildew, and cracking season after season.
On the trailer, at the ramp, or in storage, your cover keeps UV, rain, leaves, and debris out of the console and cockpit, keeping your Cast & Blast clean, dry, and ready for the next cast or hunt.
Reinforced tie-downs and a snug, tailored cut keep the cover secure and quiet — even at highway tow speed or in a stiff breeze. Proudly custom-made in the USA.
About Cast & Blast Boats
Cast & Blast builds all-welded aluminum fishing-and-hunting boats in Charleston, South Carolina, founded by lifelong Lowcountry outdoorsman Brooks Oswald around 2013. The idea is simple: one tough, shallow-draft aluminum boat that can replace owning both an inshore fishing boat and a jon boat — equally at home on the flats and in the marsh. The lineup centers on the 17 flats skiff and the 22 Kings Bay center console, built from heavy-gauge aluminum to take hard use.
Why Protect Your Cast & Blast with a Custom Cover?
An aluminum boat that lives in salt marsh and brackish water needs protection from UV, salt, rain, and grime — on the trailer, at the ramp, and in storage. A snug, custom cover keeps water, leaves, and debris out of the console and cockpit between trips, helping your Cast & Blast stay clean, dry, and ready for the next cast or hunt.
Custom-Fit vs. Generic Covers
A universal cover sits loose, traps moisture, and flaps in the wind — and the big cover catalogs don’t even carry a pattern for this small, niche builder. Our Cast & Blast covers are custom-patterned to your specific model for a snug, tailored fit that sheds water and stays put.
Built for a Niche Aluminum Boat — Custom Fit Is the Only Way
Because Cast & Blast is a small, custom aluminum builder, off-the-shelf and styled-to-fit covers rarely match. (And don’t confuse it with the unrelated SeaArk ‘Cast-N-Blast’ jon boat.) We pattern to your exact model and rigging — T-top or open — so the cover actually fits the boat you own.
Features of Our Cast & Blast Boat Covers
Each cover is crafted from marine-grade, UV-resistant fabric chosen to handle sun, salt, and humidity without fading or cracking. Reinforced stitching, tailored seams, and secure tie-downs keep it snug and quiet, while a water-repellent finish helps rain and spray run off instead of soaking through.
Ready to Cover Your Cast & Blast?
Select your model above to start a custom cover built for your exact Cast & Blast — the 17 flats skiff or the 22 Kings Bay. Every cover is proudly custom-made in the USA. If you have questions about fit or your top, our team is glad to help.
Frequently Asked Questions - Cast and Blast Boat Covers
What models do you provide covers for?
We offer custom-made T-top covers for the Cast and Blast 22 Kings Bay, tailored to fit perfectly and protect your boat from the elements.
How effective are the covers in protecting against weather conditions?
Our covers are water-resistant, providing effective protection against rain and moisture. While they aren't completely waterproof, they do a great job of keeping your boat dry under typical conditions.
Can I trailer my boat with the cover on?
Yes, our covers are suitable for trailering. They are designed to stay secure during transit, offering protection from road debris, dust, and adverse weather conditions.
How do I select the best cover for my Cast and Blast boat?
Use our cover selector tool by entering the make and model of your boat. This tool will guide you to the cover that offers the best fit and customization options.
What’s the best way to care for my boat cover?
To maintain your boat cover, brush off loose dirt regularly, and rinse with fresh water. For tougher spots, use mild soap and a soft brush. Avoid harsh chemicals to keep the fabric in good condition for years to come.
Which Cast & Blast models do you make covers for?
We make custom covers for Cast & Blast boats — the 17 flats skiff and the 22 Kings Bay center console, with or without a T-top. Tell us your model and rigging and we'll match the right pattern.
The big cover sites don't list my Cast & Blast — can you still make a cover?
Yes. Cast & Blast is a small, niche aluminum builder that the national cover catalogs don't pattern, so a custom-fit cover is the way to go. Just tell us your model and we'll pattern it for your boat.
Is this the same as the SeaArk Cast-N-Blast?
No. The Charleston-built Cast & Blast is a different boat from the SeaArk 'Cast-N-Blast' jon boat. Make sure you're ordering for the right boat — tell us your exact model and year and we'll match it.
Are your Cast & Blast covers made in the USA?
Yes — every Cast & Blast cover is custom-made in the USA from marine-grade, water-repellent fabric built for saltwater use.
Helpful boat cover guides
New to ordering? These walk you through it: the Boat Cover Buyer’s Guide (which cover you need and every option explained), the Fabric Guide (7oz vs 9oz vs Sunbrella), and How to Measure if your model isn’t listed. T-Top or open console? See T-Top Covers and Center Console Covers.