EdgeWater 200 Specifications
- Length Overall (LOA): 20'0"
- Beam: 8'2"
- Dry Weight: ~2,800 lbs
- Engine: Single outboard, max 175 HP
- Fuel Capacity: 65 gallons
- Draft: ~14"
- Hull Type: Single-Piece Infusion (SPI) foam-filled, unsinkable
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5–7 years); Sunbrella acrylic (8–10 years)
- Fit: Custom-fitted to 20'0" EdgeWater 200 specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 30 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The 200 is the largest model in EdgeWater's Heritage Series, combining a 20-foot platform with the brand's patented SPI hull technology. Unlike competitors using traditional open-mold fiberglass, EdgeWater's vacuum-infused one-piece hull is foam-filled, unsinkable, and completely wood-free — delivering superior strength and zero risk of rot or delamination over the boat's lifetime.
Yes. The 200 features a larger walk-in console with storage and a portable head compartment. Our custom T-Top cover pattern is engineered around this console profile, fitting snugly over the raised console height and clearing the console door without binding or restricting access when the cover is removed.
The 200's 8'2" beam is well within legal trailering limits (under 8'6" in most states) and requires no wide-load permits or special arrangements. The cover stays secure during highway transport with our reinforced tie-down strap system, which distributes tension evenly across the hull.
Absolutely. The T-Top cover creates a protective barrier between your console-mounted electronics and corrosive salt air. The solution-dyed fabric blocks salt spray, wind-driven moisture, and UV radiation that degrade screen coatings, wiring, and connector terminals over time.
Rinse with fresh water to remove salt deposits, then wash with mild soap and a soft brush. Avoid pressure washers and harsh chemicals. Air-dry completely before folding for storage. This simple routine twice per season extends fabric life by 1–2 years and maintains water repellency.
Our covers are built for real-world coastal conditions. The reinforced stitching, heavy-duty hem cord, and adjustable straps are designed to withstand sustained winds common at open-water marinas. For hurricane preparation, we recommend removing the cover and securing the boat per your marina's storm plan.
One piece. Perfect Fit covers are a single continuous piece of fabric that wraps the entire hull below the T-Top hardtop, including the engine area. There are no separate engine boots, snap-on sections, or multi-piece assemblies — one cover protects everything.
The 208 (20'6") is slightly longer with a wider 8'6" beam, higher max horsepower (200 HP vs 175 HP), and 87-gallon fuel capacity versus the 200's 65 gallons. The 200 is the lighter, more nimble option, while the 208 adds offshore capability and range.
No. Fuel level has no impact on cover fit. The cover is patterned to the hull's external dimensions and drapes over the stern area regardless of internal weight distribution. Whether your tank is full or empty, the cover sits the same way.
One person can install the cover on the 200, though two people make it faster. The 20-foot length means a solo installer needs to walk the cover from bow to stern and then secure straps on both sides — about 12–15 minutes alone, or 8–10 minutes with a helper.
EdgeWater 200 T-Top Boat Cover
The EdgeWater 200 is the flagship of the Heritage Series — a full 20-foot center console that maxes out the compact lineup with an 8’2″ beam, 65-gallon fuel capacity, and single outboard power up to 175 HP. Like every EdgeWater, the 200 is built using the brand’s patented Single-Piece Infusion process: a closed-mold vacuum technique that bonds foam composite stringers, engineered fiberglass, and vinylester resin into a one-piece, foam-filled, unsinkable hull that eliminates wood entirely. The result is a boat that’s three times stronger than open-molded competitors and immune to the rot, delamination, and water intrusion that shortens the life of traditionally built hulls.
A Perfect Fit T-Top cover completes the protection package for the 200’s walk-in console, livewells, rod storage, and 316L stainless hardware. Our solution-dyed marine fabric resists UV fading and salt corrosion, while the custom pattern locks to the 200’s SPI hull contours with reinforced stitching and adjustable tie-downs. Whether you store on a trailer, dock lift, or boat rack in Ponce Inlet, the cover keeps your EdgeWater ready to fish season after season.
Heritage Series Performance at 20 Feet
The 200 sits at the top of EdgeWater’s compact line, bridging the gap between the nimble Heritage boats and the larger Center Console Series. Its walk-in center console provides space for a portable head and dry storage, while the cockpit layout delivers the fishing amenities serious anglers demand — multiple rod holders, an aerated livewell, and insulated fish boxes. The SPI hull’s PermaGrid fiberglass structural system adds rigidity without weight, keeping the 200 light and fuel-efficient at ~2,800 lbs dry. Our T-Top cover is patterned around every one of these features, ensuring nothing gets missed.
Explore the EdgeWater Collection
Perfect Fit covers every EdgeWater model from 155 to 388. Browse our center console boat cover collection, or compare the EdgeWater 205 T-Top cover for the next Heritage Series step up. For a compact center console option, explore the EdgeWater 170 center console cover.
Reviews
There are no reviews yet.