Edgewater 208 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Edgewater 208 Specifications

  • Builder: EdgeWater Power Boats, Edgewater, Florida
  • Model Years: About 2017–current
  • Length Overall: 20'6"
  • Beam: 8'6"
  • Draft: About 17"
  • Weight: About 3,100 lb dry; 3,640 lb with engine
  • Fuel Capacity: 87 gal
  • Max Power: 200–250 hp single outboard (by source)
  • Deadrise: 20° (transom)
  • Cover Shipping Weight: 30 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: T-top frame, console and windshield, leaning post, bow rail, stern seat, baitwell and outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 30 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The EdgeWater 208 CC center console, about 2017 to current, including the 208CC Watchman, with its T-top. Tell us your model year when you order so we can confirm the fit.
No. The 205 CC shares the 8'6" beam, but its deck, seating and T-top layout differ, so it has its own pattern.
Yes. All three of the 208's tops sit on the same kind of frame, and the cover fits up underneath whichever one you have. Tell us which top your boat has when you order.
Our T-Top style is made for any boat with a hard top — an aluminum T-top, a canvas-roofed T-top frame or a fiberglass hardtop. The cover runs up under the top and around its supports, so the roof stays exposed. If you've added outriggers, a radar plate or a three-sided enclosure, remove the enclosure before covering and mention any top-mounted gear when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $940.00  ·  9oz $1,140.00  ·  Sunbrella $1,405.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Edgewater 208 T-Top Boat Cover — Custom-Fit for the 20’6″ EdgeWater 208 CC

EdgeWater Power Boats builds its boats in Edgewater, Florida; the company was founded in 1992 by Bob Dougherty, formerly chief designer and head of engineering at Boston Whaler, and molds its hulls with a closed-mold, vacuum-infused process it calls Single Piece Infusion. The 208 CC is EdgeWater’s current 20-foot center console; it appears in 2017 model listings and is still built to order for 2026, and a black-trimmed 208CC Watchman version was tested by Boating for 2024. It measures 20’6″ overall with an 8’6″ beam and a 17-inch draft, carries 87 gallons of fuel, and weighs about 3,100 lb dry or 3,640 lb with the engine on a 20-degree variable-deadrise deep-V; power is a single Yamaha, rated to 200 hp in Boating’s test and 250 hp on the 2020 factory sheet. Unlike the 188, the 208 comes with a T-top as standard — a powder-coated aluminum frame with an electronics box, four rod holders and two LED spreader lights, with a canvas T-top or fiberglass hardtop offered instead. The features a cover has to clear include the walk-in console with its acrylic windshield and grab rail, an aluminum leaning post with a 72-quart cooler, a folding seat on the console front, a split bow rail, the 20-gallon transom baitwell, a folding stern seat and a walk-through transom door. This T-Top cover is patterned for the 208 CC with its T-top, and like all of our Edgewater boat covers, it’s cut to this hull rather than a generic 20-foot size chart.

How It Fits the 208

The cover runs up to the underside of the T-top and wraps its legs, leaving the roof, electronics box and rod holders exposed. Below, it drapes over the windshield, console and leaning post, carries forward over the split bow rail and the insulated bow fishbox, and falls to the rubrail along the 8’6″ beam. Aft, it covers the stern seat, baitwell and transom door and encloses the outboard in the same piece. If your boat has the optional outriggers or a radar plate on the top, they stay outside the cover. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the earlier 20-footer, see the Edgewater 205 T-Top cover; for the next size up, the Edgewater 230 T-Top cover.

Sign up for updates and information about our business