Edgewater 205 T-Top Boat Cover — Custom-Fit for the 20’6″ EdgeWater 205 CC
EdgeWater Power Boats builds its boats in Edgewater, Florida; the company was founded in 1992 by Bob Dougherty, formerly chief designer and head of engineering at Boston Whaler, and molds its hulls with a closed-mold, vacuum-infused process it calls Single Piece Infusion. The 205 CC was EdgeWater’s 20-foot center console in the years before the 208 CC, with records and listings from 2005 to 2012. It measures about 20’5″ overall with an 8’6″ beam, draws about 17 inches, weighs about 2,500 lb dry and carries 90 gallons of fuel; the 2010 factory sheet offers Yamaha F150, F200 and F225 four-strokes, and an Australian review lists 225 hp maximum and 22 degrees of deadrise on its variable-deadrise hull. The T-top was an option — an aluminum frame with rocket launchers and spreader lights, with an instrument box, PFD pouch and outriggers available — alongside a sun top. Beneath it, a cover has to clear the walk-in console (5’2″ of headroom for a portable head) with its acrylic windshield and grab rail, pedestal helm seats or the optional aluminum leaning post with a 72-quart cooler, a 54-quart cooler seat at the console front, the low or high welded stainless bow rail, and the 20-gallon transom baitwell. This T-Top cover is patterned for the 205 CC with its optional T-top, and like all of our Edgewater boat covers, it’s cut to this hull rather than a generic 20-foot size chart.
How It Fits the 205
The cover runs up to the underside of the T-top and wraps its legs, leaving the top, rocket launchers and any outrigger bases exposed. Below, it drapes over the windshield, console and helm seating, spreads forward over the bow platform and bow rail, and falls to the rubrail along the 8’6″ beam. Aft, it runs over the transom and baitwell and encloses the outboard in the same piece. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Which 205 Is This For?
This pattern is cut for the 205 CC center console. EdgeWater also built a 205 CX dual console and a 205 Express on the same length; those have different deck layouts, so contact us before ordering for either one.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the earlier 20-footer, see the Edgewater 200 T-Top cover; for the model that followed, the Edgewater 208 T-Top cover.
