Everglades 290 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Everglades 290 Specifications

  • Builder: Everglades Boats (Edgewater, FL)
  • Model Years: 2005–2010 as the 290 CC (later 295 CC)
  • Length: 29'
  • Beam: 9'9"
  • Fuel Capacity: 200 gal
  • Typical Power: Twin Yamaha 250 outboards
  • Top: Integrated hardtop and wraparound windshield
  • Livewell: 66 gal
  • Construction: RAMCAP foam-core, one-piece hull and deck
  • Cover Shipping Weight: 39 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Hardtop supports and windshield, console, leaning post, forward and bow seating, transom and twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 39 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Everglades 290 CC center console built from 2005 to 2010, with its integrated hardtop. It is not cut for the 290 Pilot.
HMY treats the 295 as the same boat renamed after 2010, but we list this cover for the 290 CC. If you own a 295, send us photos or your hull ID before ordering so we can confirm the fit.
Our T-Top style is made for any boat with a hard top — a T-top, a hardtop or Everglades' integrated hardtop and windshield. The cover runs up under the top and around its supports, so the roof stays exposed. If your boat has an upper station, a tower or aftermarket rigging, send us photos before ordering.
Yes. The stern section is cut to wrap both outboards as part of the same cover, so you don't need separate motor covers.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,900.00  ·  9oz $2,150.00  ·  Sunbrella $2,550.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Everglades 290 T-Top Boat Cover — Custom-Fit for the Everglades 290 CC Center Console

Everglades Boats builds its boats in Edgewater, Florida, using its patented RAMCAP (Rapid Molded Core Assembly Process) construction, in which molded foam modules are bonded into the hull and deck to form one solid piece. The 290 CC is Everglades’ 29-foot center console of 2005 to 2010; HMY’s guide follows it under that name and then as the 295 CC through 2021. Factory specs give it a 9’9″ beam and 200 gallons of fuel on a 29-foot hull, and HMY reports nearly 45 knots on twin Yamaha 250 outboards. Its signature is the fully integrated hardtop and windshield: the T-top and console are one molding with a wraparound windshield and wing vents, a wiper and washer, and six rod holders across the back of the top. Other features a cover has to clear include Everglades’ signature seats at the stern, the helm and forward of the console, a deluxe leaning post with a 66-gallon circulating livewell and rigging station, a console with a head, sink and shower, deluxe bow seating over a 120-gallon fish box, an anchor windlass, a foldaway transom seat and white powder-coated bow rails. This T-Top cover is patterned for the 290 CC with its integrated hardtop and windshield, and like all of our Everglades boat covers, it’s cut to this hull rather than a generic 29-foot size chart.

How It Fits the 290 CC

The cover runs up to the underside of the hardtop and closes around the wraparound windshield and the top’s supports, leaving the roof and its rod holders exposed. It drapes over the console and leaning post, spreads forward over the console seat and bow seating to the rubrail along the 9’9″ beam, and continues aft over the folded transom seat to wrap both outboards in one piece. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

290 CC or 290 Pilot?

Everglades also built the 290 Pilot on this 29-foot hull, with a command console designed to close up into a pilothouse. The helm structure is different, so the Pilot has its own cover — check whether your boat is the CC or the Pilot before ordering.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the pilothouse version of this hull, see the Everglades 290 Pilot T-Top cover; for the current 28-footer, the Everglades 285 CC T-Top cover.

Sign up for updates and information about our business