Regulator 30 XO Specifications
- Length Overall (LOA): 30'7"
- Beam: 10'2"
- Dry Weight: ~9,525 lbs (with engines)
- Engine: Twin outboards, max 600 HP combined
- Fuel Capacity: 222 gallons
- Hull Type: XO Crossover — flagship bay-to-offshore hybrid
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 30'7" Regulator 30 XO specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 40 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Regulator 30 XO cover is available in 9oz solution-dyed marine polyester, 7oz solution-dyed polyester, and premium Sunbrella acrylic. All fabrics are solution-dyed — color is permanently fused into the fiber — delivering fade resistance that stands up to the 30 XO's demanding split between offshore sun exposure and humid bay-side storage.
Yes. Pattern-cut for the 30 XO's flagship crossover hull with reinforced cutouts around the T-Top legs. The fabric wraps the 30'7" hull and its wide 10'2" beam below the hardtop while the white fiberglass roof stays fully exposed. The pattern accounts for the twin-engine transom, integrated bow seating, deep cockpit, and the XO's crossover-specific deck layout.
Even at 30'7", installation takes under 5 minutes solo. Drape from bow to stern over the console and T-Top legs, then secure with the hem cord and adjustable straps. The 30 XO's wide beam provides a stable working surface, and the quick-release buckles make removal equally fast.
Yes — the cover is reinforced for trailering. However, at 30'7" and approximately 9,525 pounds with twin engines, most 30 XO owners keep the boat on a dock lift rather than a trailer. The cover is built for either storage method.
The cover wraps the hull below the hardtop, creating a complete barrier over the helm station, Yamaha digital controls, GPS/fishfinder, leaning post, rod holders, bow seating, and all upholstery. Engine lower units remain visible below the fabric line at the stern. UV, rain, salt, and debris are blocked.
2-year manufacturer warranty on materials and workmanship. The 9oz fabric delivers 5-7 years and Sunbrella acrylic delivers 8-10 years of continuous coastal exposure protection.
Water-resistant with DWR finish. Breathable to prevent mildew and trapped moisture — critical for the 30 XO's premium helm electronics and upholstery, especially when stored for extended periods between trips.
Yes. Pattern-cut to the 30 XO's standard production dimensions (30'7" LOA, 10'2" beam) with factory T-Top configuration.
9oz fabric: Navy, Black, Charcoal. Sunbrella acrylic: expanded palette. All solution-dyed for permanent UV fade resistance.
Flat $30 per cover, continental US. Ships within 1-2 business days in a protective storage bag.
Regulator 30 XO T-Top Boat Cover — Flagship Crossover Twin-Engine Protection
The Regulator 30 XO stretches 30’7” overall with a 10’2” beam and approximately 9,525 pounds with twin engines — the flagship of Regulator Marine’s XO Crossover series and the largest hybrid bay-to-offshore boat in their lineup. Built in Edenton, North Carolina by the family-owned company that Joan and Owen Maxwell started in an old A&P grocery store in 1988, the 30 XO handles up to 600 horsepower in a twin-engine configuration with 222 gallons of fuel, giving it the range and power to fish everything from backcountry flats to offshore canyons in a single day without refueling. The hand-laid fiberglass hull with vinylester barriers and composite coring delivers the same Regulator ride quality across every sea state — the 30 XO just does it with the draft flexibility to access water that the pure offshore models can’t reach. Protecting a boat at this level requires more than a generic cover — browse the full center console boat covers collection to see why pattern-cut precision matters.
Custom-Fit for the 30 XO’s Flagship Dimensions
This cover is pattern-cut for the 30 XO’s expansive deck layout — wide 10’2” beam, deep cockpit, integrated bow seating, and the twin-engine transom configuration. The fabric wraps the hull below the hardtop with reinforced cutouts around the T-Top support legs, while the white fiberglass hardtop roof remains fully exposed. A hem cord and adjustable tie-down straps secure the cover even at this larger size. Installation takes under five minutes solo — drape, strap, and buckle. The entry point to the XO series starts with the Regulator 24 XO T-Top boat cover, offering crossover versatility in a more compact single-engine package.
Flagship Investment, Flagship Protection
The 30 XO represents the pinnacle of Regulator’s crossover engineering — family-owned quality, hand-laid construction, and the versatility to fish every environment from skinny-water flats to open-ocean swells. The cover needs to match that investment. Choose 9oz solution-dyed marine fabric for 5-7 years of UV and salt resistance, or premium Sunbrella acrylic for 8-10 years. Both are water-repellent, mildew-resistant, and breathable to prevent trapped moisture from damaging the 30 XO’s electronics and upholstery during extended dock storage. Reinforced seams handle the demands of this larger hull. Every cover ships with a 2-year manufacturer warranty within 1-2 business days. For the compact entry-level Regulator, the Regulator 21 FS T-Top boat cover delivers the same quality in a trailerable package.
Reviews
There are no reviews yet.