Custom Fit Boat Covers for Regulator Boats
Regulator Marine has built premium offshore center consoles in Edenton, North Carolina since 1988. Founded by Joan and Owen Maxwell and built around a deep-vee hull designed with naval architect Lou Codega, Regulators are tested against the brutal inlets of the Outer Banks and famous for a dry, soft, comfortable ride known to fans as the ‘Legendary Ride.’ The lineup runs from the Regulator 23 to the 41, plus the 26XO crossover. A seriously built sportfisher like this deserves a cover cut to match — ours are patterned to your exact model and year.
Regulator Models We Cover
T-Tops: 21 FS, 23 (1990-2012), 23 (2013-Present), 24 FS, 24 XO, 25, 26 FS, 26 XO, 28 FS, 30 XO, 31, 32 FS, 35 Bracket
Regulator Boat Cover Features and Benefits
Cut to your exact Regulator model and year, including the T-top or hard-top, so the cover fits clean over your console instead of draping loose.
Solution-dyed marine fabric stands up to brutal offshore sun, salt, and humidity without fading, protecting your investment season after season.
A water-repellent finish helps rain and spray sheet off instead of pooling, while breathable construction limits trapped moisture and mildew.
Every Regulator cover is custom cut and sewn to order in the USA with reinforced seams, secure tie-downs, and a tailored fit.
About Regulator Marine
Regulator Marine started in 1988 in an old grocery store in Edenton, North Carolina, founded by Joan and Owen Maxwell, boaters who were tired of compromises. Working with renowned naval architect Lou Codega, they engineered a deep-vee hull built to handle the dangerous inlets of the Outer Banks — a hull that became known for its dry, soft, comfortable ‘Legendary Ride.’ Still family-owned and built in North Carolina, Regulator makes premium center console sportfishers from the 23 up to the 41, plus the 26XO crossover.
Why Protect Your Regulator with a Custom Cover?
A premium offshore sportfisher is a major investment, and the elements go to work the moment it stops running. UV fades gelcoat and upholstery, salt corrodes hardware and electronics, and standing water breeds mildew. A snug cover shields the console, helm, seating, and rigging on the trailer, at the slip, or in storage — protecting both condition and resale value.
Custom-Fit vs. Generic Covers
A universal cover sits loose, flaps at highway speed, and traps moisture against the gelcoat. Our Regulator covers are patterned to your specific model and year for a tailored fit that sheds water, resists wind, and stays put — the kind of fit a boat built to this standard deserves.
Built for an Offshore Center Console
A Regulator’s deep-vee hull, tall freeboard, center helm, and substantial T-top or hard-top mean a flat, generic cover never sits right. We pattern to your exact hull and configuration, including the top, for a clean, snug fit — even on older Regulator hulls that have been running inlets for decades.
Features of Our Regulator Boat Covers
Each cover is crafted from marine-grade, UV-resistant fabric chosen to handle sun, salt, and humidity without fading or cracking. Reinforced stitching, tailored seams, and secure tie-downs keep it snug and quiet on the road, while a water-repellent finish helps rain and spray run off instead of soaking through.
Ready to Cover Your Regulator?
Select your model above to start a custom cover built for your exact Regulator — from the 23 up to the 41, or the 26XO. Every cover is proudly custom-made in the USA. Not sure of your model, year, or top configuration? Contact us and we’ll help.
Frequently Asked Questions - Regulator Boat Covers
Which Regulator models do you provide covers for?
We provide custom-made T-top covers for several Regulator models, including the 21 FS, 26 XO, and 32 FS, ensuring a perfect fit and maximum protection for your boat.
How effective are these covers in protecting my boat from the elements?
Our covers are water-resistant and offer excellent protection against environmental factors like UV rays, rain, dust, and bird droppings, keeping your boat well-protected.
Can I use the cover while trailering my boat?
Yes, our covers are suitable for trailering, providing protection from road debris, dust, and adverse weather conditions while keeping your boat secure during transport.
How do I choose the right cover for my Regulator boat?
Use our cover selector tool by entering your boat’s make and model to find the best-fitting cover for your Regulator vessel.
How should I maintain my boat cover?
Regularly brush off loose dirt and rinse with fresh water. For more stubborn stains, use a mild soap solution with a soft brush, and avoid using harsh chemicals to ensure the fabric's durability.
Which Regulator models do you make covers for?
We make custom covers across the Regulator lineup — from the 23 up to the 41, plus the 26XO crossover. Tell us your model, year, and top configuration and we'll match the right pattern.
I have an older Regulator — can you still cover it?
Yes. Regulators are built to run for decades, and we pattern covers for both current and older models. Give us your model and year and we'll match the correct fit, even if the factory no longer offers a cover for it.
Does my T-top or hard-top change the cover?
It does. A T-top or hard-top changes the shape the cover has to clear, and each takes a different pattern. Let us know your exact configuration and we'll build the cover to fit it.
Are your Regulator covers made in the USA?
Yes — every Regulator cover is custom-made in the USA from marine-grade, water-repellent fabric built to handle offshore sun and salt.
Helpful boat cover guides
New to ordering? These walk you through it: the Boat Cover Buyer’s Guide (which cover you need and every option explained), the Fabric Guide (7oz vs 9oz vs Sunbrella), and How to Measure if your model isn’t listed. T-Top or open console? See T-Top Covers and Center Console Covers.