Costa Custom 264 T-Top Boat Cover — Custom-Fit for the Costa Custom 264 Hybrid Catamaran
Costa Custom Boats is a Pinellas County, Florida builder (dealer listings give its home as Largo) that makes high-performance custom power catamarans for offshore fishing and coastal boating. The 264, also sold as the 264 HC, is the builder’s 26-foot hybrid catamaran, listed from the 2020 model year on. It measures 26’4″ overall with a 10′ beam, drafts about 15 inches, weighs about 6,800 lb fully rigged with a second station, and carries 200 gallons of fuel in two 100-gallon tanks. The boats we’ve seen run twin Mercury 300 hp outboards, often on jack plates. Builder copy credits the twin-hull design with a smooth, dry ride in rough water. Features that shape a cover include a center console under a hardtop, often with an upper second station and sometimes a sliding sunroof, a leaning post with a tackle station, an aft livewell of about 80 gallons and an insulated coffin box forward. This T-Top cover is patterned for the Costa Custom 264 with its top, and like all of our Costa Custom boat covers, it’s cut to this hull rather than a generic 26-foot size chart.
How It Fits the Costa Custom 264
The cover runs up to the underside of the hardtop and wraps its supports, so the roof, the upper-station controls and any radar stay outside. Below the top, it falls over the console and leaning post. Because the 264 is a twin-hull boat, the deck spans both hulls at nearly full width, so the cover is cut to the full 10′ beam and drapes down over both sponsons to the rubrail rather than tapering like a monohull cover; the tunnel between the hulls stays open underneath. Forward, it covers the coffin box and bow, and aft it spans the livewell and continues over the transom to wrap both outboards in one piece. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Tell Us How Your 264 Is Rigged
Each 264 is built to order, so tops and rigging vary — hardtops with or without a second station, sunroofs, trolling motors and shallow-water anchors. Our T-Top style is made for any boat with a hard top, so it’s the right style whichever top you have. When you order, tell us which top is on your boat and send a photo; we’ll confirm the fit. If you run a trolling motor, remove it before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If you’re comparing other power catamarans with tops, see our Twin Vee 280 GFX2 T-Top cover and World Cat 235 HB T-Top cover.
