Mako 21 Pro Skiff Specifications
- Length Overall (LOA): 21'4"
- Beam: 8'0"
- Dry Weight: ~2,300 lbs
- Engine: Single outboard, 150 HP max
- Fuel Capacity: 34 gallons
- Draft: ~10"
- Hull Type: Advanced Inverted V (AIV) fiberglass
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 21'4" Mako 21 Pro Skiff specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 31 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Mako 21 Pro Skiff T-Top cover is available in 9oz solution-dyed marine fabric for reliable 5-7 year protection, or premium Sunbrella acrylic for 8-10 years of UV and weather resistance. A lighter 7oz option is also available. All fabrics are solution-dyed through the fiber for colorfastness and long-term durability.
Yes. The Mako 21 Pro Skiff T-Top cover is pattern-cut with reinforced cutouts that wrap around the T-Top support legs. The cover drapes from the hardtop frame down to the rubrail, leaving the white fiberglass hardtop roof exposed on top while fully enclosing the hull, console, and cockpit below.
Installation takes one person under five minutes. Drape the cover over the bow, align the T-Top cutouts around the support legs, pull the fabric aft past the console, then secure the adjustable strap-and-buckle tie-downs along the gunwale. No tools required.
Yes. The Mako 21 Pro Skiff T-Top cover features reinforced stitching and a hem cord system designed for highway-speed trailering. The adjustable straps hold the cover tight against the hull at speed, preventing billowing or flapping during transport.
Absolutely. The Mako 21 Pro Skiff T-Top cover creates a complete barrier over the helm console, fishfinder, GPS, VHF radio, and all cockpit surfaces. The water-repellent fabric blocks UV rays, rain, salt spray, and airborne debris that cause fading and deterioration to your Pro Skiff's electronics and upholstery.
Every Mako 21 Pro Skiff T-Top cover includes a 2-year manufacturer warranty covering defects in materials and workmanship. The solution-dyed fabrics are engineered for 5-7 years of service life, and the Sunbrella option extends that to 8-10 years under normal conditions.
The Mako 21 Pro Skiff T-Top cover is water-resistant with a DWR (durable water repellent) finish that causes rain and spray to bead and roll off the fabric surface. The cover is also breathable, allowing trapped moisture and condensation to escape rather than pooling underneath — which prevents mildew growth.
Yes. This cover is designed to fit all standard production years of the Mako 21 Pro Skiff equipped with a factory T-Top. Since the Pro Skiff's hull dimensions and T-Top mounting points have remained consistent across production, the cover fits all model years without modification.
The 9oz solution-dyed marine fabric is available in Navy, Black, and Charcoal. The premium Sunbrella acrylic line offers an expanded selection of colors. All colors are solution-dyed through the fiber for lasting colorfastness that won't fade, even in harsh saltwater sun.
Shipping is a flat rate per cover for delivery anywhere in the continental United States. Orders typically ship within 1-2 business days and arrive via standard ground carrier.
Mako 21 Pro Skiff T-Top Boat Cover — Shallow-Water Specialist Protection
The Mako 21 Pro Skiff is a purpose-built shallow-water platform measuring 21’4″ with an 8’0″ beam, weighing just 2,300 pounds and rated for up to 150 horsepower. What sets the Pro Skiff apart is Mako’s Advanced Inverted V hull design — a proprietary bottom that delivers an exceptionally shallow 10-inch draft for skinny-water access while maintaining stability and a dry ride in chop. With a 34-gallon fuel tank sized for all-day inshore runs and the lightweight construction that defines the Pro Skiff series, this boat is built to chase redfish and trout across flats that deeper-V hulls cannot reach. A custom-fitted T-Top cover from Perfect Fit Boat Covers wraps the entire hull below the hardtop, protecting the Pro Skiff’s technical poling platform, flush-mount rod holders, and helm station from sun, salt, and weather.
Tailored to the Pro Skiff’s Skinny-Water Layout
The 21 Pro Skiff features a clean, uncluttered deck with a raised bow casting platform, a low-profile center console, integrated rod storage, and a rear deck designed for poling or sight-fishing — all vulnerable to UV degradation when left uncovered. This cover is pattern-cut to account for the T-Top support legs, the low-profile console, and the transom-mounted outboard, draping from the hardtop frame to the rubrail with adjustable strap-and-buckle tie-downs. One person handles installation in under five minutes. The reinforced construction supports highway-speed trailering, matching the same trailerable protection found on the Mako 22 T-Top cover and the rest of the Mako lineup.
Protection That Matches Mako Tough Standards
Choose between 9oz solution-dyed marine fabric rated for five to seven years of UV and weather resistance, or premium Sunbrella acrylic for eight to ten years of extended protection. Both fabrics feature a water-repellent DWR finish, mildew resistance, and breathable construction that prevents moisture from pooling beneath the cover. Double-stitched seams throughout and a continuous hem cord at the rubrail ensure a tight fit that resists wind uplift, and every cover ships with a 2-year manufacturer warranty. Anglers running similar inshore T-Top platforms will find the same tailored quality in covers like the Sea Hunt 219 Ultra T-Top cover.
Reviews
There are no reviews yet.