7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
45 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Onslow Bay 33 Tournament Edition — 32'10" on centerline with a 9'11" beam — with its standard T-top and hardtop. The 33 replaced the earlier 32 Tournament Edition, which is listed at the same length with a beam just under 10', but its deck and top may differ. Please confirm your model year, whether your boat is a 32 or 33, and which top it has when you order so we can check the pattern before we cut.
Yes. The 33 is rated for twins or triples up to 1,200 hp. Either way the cover runs over the transom and falls as one loose drape over all of the cowlings, with no individual engine pockets, and the lower units stay exposed below the hem.
The cover drapes over the leaning post and falls to the rubrail, so the standard post, tackle center and livewell versions all sit underneath it. If you have the 73-gallon livewell post with the rear bench seat, rear T-top legs or T-top wings, tell us when you order and we'll confirm the fit around them.
Each Onslow Bay cover is cut to its own hull. The 27 is about six feet shorter with a 9'5" beam; the 37 is nearly five feet longer, 10'6" wide and has a cabin console with a lounge seat on its front. None of the three patterns fits the others.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or 7oz polyester (Black) for budget-friendly coverage. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz and 5 years on 9oz). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$2,750.00 · 9oz$2,980.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Onslow Bay 33 Tournament T-Top Boat Cover — Custom-Fit for the Onslow Bay 33 Tournament Edition
Onslow Bay Boatworks is a small, family-owned builder in Holly Ridge, North Carolina, started by second-generation boat builder and kingfish tournament angler Brad Knight. It sells factory-direct and builds each boat to order, about 30 a year. The 33 Tournament Edition is the step-hull successor to the builder’s earlier 32 Tournament Edition. It’s 32’10” on centerline with a 9’11” beam, about 6,300 lb dry, with 357 gallons of fuel and a rating of 600–1,200 hp as twin or triple outboards. The positive-lift ventilated step hull runs 24 degrees of deadrise at the transom with a 7-degree reverse chine and deep bow flare. The three-piece boat has a one-level deck with floor fish boxes, a side-entry console with a 125-quart cooler seat, and a 45-gallon round transom livewell. The leaning post comes four ways: standard, tackle center, 45-gallon livewell, or a 73-gallon livewell with a rear bench seat. A T-top with fiberglass hardtop on oversized pipe, an electronics box and a three-sided enclosure is standard. This T-Top cover is patterned for the Onslow Bay 33 Tournament Edition with its T-top, and like all of our Onslow Bay boat covers, it’s cut to this hull rather than a generic 33-foot size chart.
How It Fits the Onslow Bay 33 Tournament
The cover runs up to the underside of the hardtop and wraps the pipe frame, so the roof and the lights and rod holders on it stay exposed. Below the top it drapes over the enclosure and side-entry console, the leaning post in whichever configuration you chose, and the bow, then falls to the rubrail along the 9’11” beam. Aft, it covers the transom livewell and continues as one loose drape over the outboard cowlings, two engines or three, with the lower units exposed. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or a lighter 7oz fabric for budget-friendly coverage. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3 years on 7oz and 5 years on 9oz fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the rest of the lineup, see our Onslow Bay 27 T-Top cover and Onslow Bay 37 Tournament T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.