Regulator 35 Specifications
- Length Overall (LOA): 35'1" (40'8" w/ bracket & engines)
- Beam: 11'9"
- Dry Weight: ~16,500 lbs (w/ engines)
- Engine: Triple Yamaha F350, 1,050 HP combined
- Fuel Capacity: 405 gallons
- Draft: ~27" (engines up)
- Hull Type: Deep-V fiberglass with 24° deadrise and Carolina flare
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 35'1" Regulator 35 specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 50 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Regulator 35 cover is available in 9oz solution-dyed marine fabric for dependable UV and mildew protection, with an upgrade to premium Sunbrella acrylic for extended durability and superior color retention.
Yes — the cover is pattern-cut with reinforced cutouts that wrap around the T-Top support legs on your Regulator 35. The hardtop roof stays fully exposed while the hull and cockpit below are protected.
Drape the cover over the Regulator 35 hull, route the adjustable straps beneath the rubrail, and buckle down. The process takes under 5 minutes and one person can handle it without tools.
No — please remove the cover before towing your Regulator 35 Bracket. Our covers are not designed to be trailered: towing with the cover on can cause severe damage to the cover and voids the warranty. The cover is designed for storage only — on a trailer, boat lift, dry stack, or jet dock — and comes off in minutes at the ramp.
Absolutely. The cover creates a complete barrier over your Regulator 35's helm electronics, Seakeeper Ride system, dual Blue Water Bait Stations, rod holders, and all cockpit surfaces — blocking UV rays, rain, salt, and debris.
Your Regulator 35 Bracket cover is backed by our manufacturer's warranty for the original purchaser. Materials and workmanship — stitching, straps, buckles, zippers, and other hardware — are covered for 1 year from the purchase date. Fabric is covered for 3 years on 7oz, 5 years on black or navy 9oz, and 6 years on Sunbrella. Covered defects are repaired or replaced after you contact us for a Return Merchandise Authorization (RMA) number. The warranty does not cover improper use, accident or negligence, unauthorized modifications, improper care, mold or mildew, incorrectly placed orders, theft or loss, or acts of God — and traveling with the cover on or using it in the water voids the warranty. See our Warranty page for full details.
The cover is water-resistant with a durable water-repellent (DWR) finish that sheds rain and spray. It's also breathable, preventing trapped moisture and mildew buildup under the cover on your Regulator 35.
This cover is designed to fit the Regulator 35 with the factory T-Top and bracket-mount engine configuration. If your 35 has significant aftermarket modifications, contact us to confirm fitment.
The Regulator 35 Bracket cover is available in 9oz solution-dyed polyester in Navy or Black, 7oz polyester in Black, or premium Sunbrella acrylic in Marine Blue, Black, or Smoke. Choose your fabric and color in the order options above.
Shipping is a $30 flat rate per cover within the continental United States. Because every cover is custom-made to order, please allow 1–3 weeks for your Regulator 35 Bracket cover to be made and shipped — you'll receive tracking information as soon as it leaves our facility.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Regulator 35 Bracket T-Top Boat Cover — Tournament-Grade Offshore Armor
The Regulator 35 is a 35’1″ tournament center console — stretching to 40’8″ overall with its signature bracket-mount triple Yamaha F350 configuration — featuring an 11’9″ beam, 24° deep-V hull with Carolina flare, and a 405-gallon fuel tank built for extended blue-water runs. Regulator Marine was founded in 1988 in Edenton, North Carolina, and every hull features the sharp-entry bow design that defines Carolina-built sportfishing boats. A Perfect Fit T-Top cover wraps the 35’s expansive hull below the hardtop, protecting the cockpit, dual Blue Water Bait Stations, up to 49 rod holders, and Seakeeper Ride 750 system from the elements while you browse our complete selection of T-Top boat covers for every size platform.
Tailored to the Regulator 35’s Bracket Configuration
This cover is pattern-cut to the Regulator 35’s specific dimensions, accounting for the T-Top support legs, center console with cabin access, leaning post, oval pressurized livewell, and the unique bracket-mount engine setup that extends the platform aft. The reinforced construction handles storage demands for a boat this size, and installation follows the same straightforward process — drape, strap, buckle, done. Remove the cover before towing — it’s designed for storage, not highway travel. The 27-inch draft (engines up) keeps ramp access manageable for a 35-footer. If you run another Regulator, check out the Regulator 32 FS boat cover for the next model down in the lineup.
Protection That Matches Regulator Precision
Choose from two proven marine fabrics: our standard 9oz solution-dyed marine fabric delivers 5–7 years of reliable UV and mildew resistance, while premium Sunbrella acrylic extends coverage to 8–10 years with superior color retention and fade resistance. Both options are water-repellent, breathable to prevent trapped moisture, and double-stitched at every seam for the kind of durability a Regulator owner expects. Every cover ships with our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and flat-rate shipping across the continental United States. For another big-water tournament platform in this size class, take a look at the Pursuit 3480 boat cover.