East Cape 17 Caimen Center Console Boat Cover & Canvas

East Cape 17 Caimen Specifications

  • Builder: East Cape (formerly East Cape Canoes)
  • Length (factory): 17' 10"
  • Beam: 61.5" (about 5' 1")
  • Draft: 4"–7" fully rigged (factory "real draft")
  • Suggested Power: 25–70 hp outboard (factory)
  • Weight: About 350 lb (Honda 2008 test, side console)
  • Hull: Vacuum-infused vinylester, high-density core
  • Status: East Cape Legacy Fleet — built on special request
  • Cover Shipping Weight: 22 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Full custom cover over the console, bow and stern decks, cockpit and outboard, sloped to the rubrail
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 22 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

Center Console is our name for the full-coverage style, made for boats without a hardtop or T-top. It covers the whole boat from bow to stern and rubrail to rubrail, engine included, and this one is patterned for your model.
It's patterned for the East Cape Caimen, the 17'10" poling skiff with a 61.5-inch beam that East Cape now builds on request as part of its Legacy Fleet. Our maker lists it as the 17 Caimen, and Honda's test data calls it the Caimen 17, so it's the same boat.
The cover is cut to the Caimen's hull and console. Remove the push pole and any removable casting platform before covering, and if your boat has a fixed tower or a tall poling platform over the motor, contact us before ordering so we can confirm how it fits.
No. The Vantage is built on a bigger, wider version of the Caimen hull, and the Glide is a separate microskiff hull; each has its own pattern.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $750.00  ·  Sunbrella $885.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

East Cape 17 Caimen Center Console Boat Cover — Custom-Fit for East Cape’s Technical Poling Skiff

The Caimen is the no-nonsense technical poling skiff that East Cape now calls “the guide’s simple, brilliant workhorse.” Texas Saltwater Fishing Magazine described it as a totally new design for the company when it appeared — spray rails to handle bigger water while staying skinny, and a hull that holds its line on the pole whether headed into or across the wind. East Cape’s published specs put the Caimen at 17’10” long with a 61.5″ (about 5’1″) beam, a real-world draft of 4″–7″ fully rigged with two anglers and gear, and 25–70 hp of suggested outboard power, on a vacuum-infused, vinylester hull with a lightweight high-density core. Honda’s 2008 test of a side-console Caimen 17 lists a weight of 350 lb, a 10-gallon tank and a 50 hp maximum at that time. Boats seen for sale run from 2014 to 2015 model years, and today the Caimen sits in East Cape’s Legacy Fleet as a retired classic built on special request, alongside a lighter Caimen Lite. East Cape offered it as a tiller, side-console, centered or offset console, or tower boat, usually with a poling platform aft and a casting platform forward. This full cover is patterned for the 17 Caimen with its console, and like all of our East Cape boat covers, it’s cut to this hull rather than a generic 18-foot size chart.

How It Fits the 17 Caimen

At barely over five feet wide, the Caimen needs a narrow cover, and a generic 18-footer cover would bag and flap on it. Ours peaks over the console and slopes straight down to the low gunwales, runs flat over the open bow deck and stern, and wraps the outboard at the transom in the same piece so rain runs off rather than pooling on the flush decks. Take off removable gear before covering — push pole, casting platform and anything clipped to the poling platform — and remove a bow-mount trolling motor if you run one. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Console, Tiller or Tower?

Because East Cape built the Caimen in several steering and platform arrangements, tell us how yours is rigged when you order: console position, whether a poling platform or tower sits over the motor, and your outboard size. We’ll confirm the fit against this pattern before your cover is cut. The larger Vantage uses a bigger version of this hull and has its own pattern.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Comparing East Cape patterns? See our East Cape Vantage cover, the East Cape 17 EVO X cover, or the East Cape 17 Glide cover.

Sign up for updates and information about our business