East Cape 17 Glide Center Console Boat Cover & Canvas

East Cape 17 Glide Specifications

  • Length: 17'
  • Beam: 5' 1"
  • Draft: 4"–5"
  • Transom Deadrise: 4°
  • Dry Weight: 370 lb (tiller) / 415 lb (side console)
  • Max Power: 30 hp
  • Introduced: 2013 (now a legacy hull, built on request)
  • Cover Shipping Weight: 22 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Console, bow and stern decks and outboard in one piece
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 22 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It is patterned for the East Cape Glide, the 17-foot microskiff East Cape introduced in 2013 to replace the Gladesman. It is not cut for the Gladesman itself, which is a narrower, canoe-like hull.
The Glide was built in both tiller and side-console versions. This pattern is cut for a boat with a console, which the cover peaks over, so please contact us before ordering for a tiller Glide and we will confirm what fits.
The Glide is much narrower (5'1" beam versus 5'10" on the 17 EVO X) and far lighter, so its cover is cut slimmer through the middle. The two covers are not interchangeable.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $750.00  ·  Sunbrella $885.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

East Cape 17 Glide Center Console Boat Cover — Custom-Fit for East Cape’s Ultra-Light Microskiff

The Glide debuted at East Cape in 2013 as the replacement for the Gladesman, the company’s original microskiff — a little wider and more finished, but still a nimble boat built for super-skinny water. East Cape now lists it in its Legacy Fleet as a retired hull that is built on request. Sport Fishing magazine lists the Glide at 17 feet long with a 5’1″ beam, a 4″–5″ draft, 4° of transom deadrise and a 30 hp maximum, with a dry weight of only 370 lb in tiller form or 415 lb with a side console. Its sharp entry and chines set well below the waterline make it a very quiet boat to pole. This center console cover is patterned for the 17 Glide with its console, and like all of our East Cape boat covers, it’s cut to this hull rather than a generic 17-foot size chart.

How It Fits the 17 Glide

With a beam of barely five feet, the Glide needs a narrow, close-fitting cover — a generic 17-footer cover would bag and flap on it. Ours peaks over the console and slopes straight down to the low gunwales, runs flat over the open bow and stern decks, and wraps the small outboard at the transom in the same piece. On a hull that weighs about 400 lb, keeping excess fabric out of the wind is what keeps a cover on the boat and the boat steady on its trailer or lift. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Moving up in size? See our East Cape 17 EVO X cover and the East Cape 18 Lostmen cover.

Sign up for updates and information about our business