7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
22 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
East Cape lists the Vantage at 19'2" overall. Our cover pattern carries the "17 Vantage" name from our maker's pattern list, so please measure your boat and contact us before ordering if it does not match — we will confirm the right pattern for your hull.
No. The VHP shares the Vantage's 19'2" length and 6'7" beam but is rated for 115–175 hp, so it may carry a larger outboard. Contact us with your engine before ordering for a VHP.
East Cape builds the Vantage with a side console, and the cover peaks over the console to shed water. Tell us your console position when you order so we can confirm the fit.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$750.00 · Sunbrella$885.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
East Cape 17 Vantage Center Console Boat Cover — Custom-Fit for East Cape’s Big-Water Poling Skiff
The Vantage was East Cape’s newest model when it began appearing at redfish tournaments in 2010, and it is still in the current lineup. Built on the Caimen’s poling hull but bigger in every way — longer, wider, with bigger spray rails and room for more horsepower — it still poles like a much smaller skiff. East Cape’s current spec sheet lists the Vantage at 19’2″ long with a 6’7″ beam, 12° of deadrise, a 7″–9″ draft, a 28-gallon fuel tank, 90–115 hp and capacity for four, with an infused, cored vinylester hull and an optional carbon/Kevlar build. The layout pairs a full-width bow casting deck with front and rear storage hatches, clean gunwales with under-gunnel rod storage and a side console. This center console cover is patterned for the Vantage with its console, and like all of our East Cape boat covers, it’s cut to this hull rather than a generic size chart.
How It Fits the Vantage
The cover peaks over the console and slopes down to the gunwales, lying across the wide bow casting deck and the hatches so water sheds off the sides, while the clean, uncluttered gunwales give the hem cord a smooth run along the rubrail. At the stern it wraps the outboard in the same piece of fabric, so the motor stays covered without a separate hood. Because the Vantage is longer and wider than East Cape’s 17-series skiffs, it is worth confirming your hull before ordering (see the FAQ below). Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Comparing East Cape patterns? See our East Cape 18 center console cover and the East Cape 17 EVO X cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.