7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
37 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's made for the Pair Customs 24 MV (Mod Vee) center console — 24' hull, 27'4" overall with the bracket, 8'6" beam — with a fiberglass T-top. Pair offers two T-top sizes, a large console with forward cooler seat and several seating options on this boat, so please confirm your model year, console, top and bracket setup when you order so we can check the pattern before we cut.
Pair builds a full bracket onto the transom, so the outboard sits well aft of the deck. The cover runs over the transom and the bracket and falls as one loose drape over the engine cowling — there's no fitted engine pocket — and the lower unit stays exposed below the hem.
MV stands for Mod Vee, Pair's modified-V hull. The builder lists the 24 MV and the 24 DV (deep-V) with the same 24' hull, 27'4" overall length and 8'6" beam; the MV has 14 degrees of transom deadrise, a 14" draft and 106 gallons of fuel, while the DV has 22 degrees, a 20" draft and 150 gallons.
If your boat is a 24 MV, order this one — it's listed specifically for the Mod Vee. We also offer a separate Pair Customs 24 cover for the same 24-foot hull. If you aren't sure which version you have, check your paperwork or hull ID and contact us before ordering.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$1,700.00 · 9oz$1,925.00 · Sunbrella$2,285.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Pair Customs 24 MV T-Top Boat Cover — Custom-Fit for the Pair Customs 24 MV Center Console
Pair Customs boats are built by Bryan Pair’s Pair Marine in Washington, North Carolina, a small builder that keeps its center consoles clean, simple and classic. Its center consoles are three-piece, all-composite builds over a cored grid stringer system, with a heavily laminated cored transom that carries a full outboard bracket. The 24 MV — the builder’s 24 Mod Vee — is the modified-V version of its 24-foot center console, made for shallower, more sheltered water than the deep-V 24. It has a 24′ hull, measures 27’4″ overall with the bracket, and carries an 8’6″ beam, about 4,300 lb dry weight, 106 gallons of fuel and a 14-degree transom deadrise with a 14-inch draft. Power is a single outboard on a full transom bracket set up for a 30″ shaft. Standard layout: a console with insert, footrest and glove box, a polished aluminum leaning post, a 27-gallon livewell, in-floor and forward fish boxes and an anchor locker. The T-top is an option rather than standard: the builder offers a 5.5′ x 7′ fiberglass top with an electronics box and five rod holders, or a larger 6′ x 9′ fiberglass top with rear legs for its large console, as well as a canvas top. This T-Top cover is patterned for the Pair Customs 24 MV with its T-top, and like all of our Pair Customs boat covers, it’s cut to this hull rather than a generic 24-foot size chart.
How It Fits the Pair Customs 24 MV
The cover runs up to the underside of the fiberglass T-top and wraps its legs — including the rear legs on the larger 6′ x 9′ top — so the roof, electronics box and rod holders stay exposed. Below the top it drapes over the console and windshield, the leaning post and the bow and falls to the rubrail along the 8’6″ beam. Aft, it covers the livewell and transom, then continues past the bracket as one loose drape over the outboard cowling, with the lower unit exposed. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Need a different Pair? See our Pair Customs 24 T-Top cover and Pair Customs 21 MV T-Top cover, or compare the Key West 249 FS T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.