Pair Customs 21 MV T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Pair Customs 21 MV Specifications

  • Builder: Pair Marine (Washington, NC)
  • Hull Length: 21'
  • Length Overall: 23'4" (with bracket)
  • Beam: 8'6"
  • Dry Weight: About 3,100 lb
  • Fuel: 80 gal
  • Deadrise: 14° at the transom (Mod Vee)
  • Draft: 14"
  • Power: Single outboard on a full transom bracket
  • Cover Shipping Weight: 33 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: T-top legs, console and windshield, leaning post, bow, cockpit, transom and bracket-mounted outboard cowling
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 33 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's made for the Pair Customs 21 MV (Mod Vee) center console — 21' hull, 23'4" overall with the bracket, 8'6" beam — with a fiberglass T-top. Pair has offered more than one top on this boat, plus a large split-door console and different seating, so please confirm your model year, which top and console you have, and your bracket setup when you order so we can check the pattern before we cut.
Pair builds a full bracket onto the transom, so the outboard sits well aft of the deck. The cover runs over the transom and the bracket and falls as one loose drape over the engine cowling — there's no fitted engine pocket — and the lower unit stays exposed below the hem.
We make this cover for the 21 MV. The 21 DV shares the 21' hull length, 23'4" overall length and 8'6" beam, but it's a 22-degree deep-V with a 20" draft and a bracket built for a 30" shaft outboard. If you own a 21 DV, contact us before ordering.
MV stands for Mod Vee, Pair's modified-V hull. On the 21 it has 14 degrees of transom deadrise and a 14" draft for skinny, sheltered water, versus 22 degrees on the deep-V (DV) version.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,050.00  ·  9oz $1,300.00  ·  Sunbrella $1,560.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Pair Customs 21 MV T-Top Boat Cover — Custom-Fit for the Pair Customs 21 MV Center Console

Pair Customs boats are built by Bryan Pair’s Pair Marine in Washington, North Carolina, a small builder that keeps its center consoles clean, simple and classic. Its center consoles are three-piece, all-composite builds over a cored grid stringer system, with a heavily laminated cored transom that carries a full outboard bracket. The 21 MV — the builder’s 21 Mod Vee — is the shallow-water version of its 21-foot center console. It has a 21′ hull, measures 23’4″ overall with the bracket, and carries an 8’6″ beam, about 3,100 lb dry weight, 80 gallons of fuel and a 14-degree transom deadrise that drafts just 14 inches. Power is a single outboard on a full transom bracket set up for a 25″ shaft. Standard layout: a console with insert, footrest and glove box, a polished aluminum leaning post with flip-up bolster, a 27-gallon livewell, in-floor and forward fish boxes and an anchor locker. The T-top is an option rather than standard: the builder offers a 5.5′ x 7′ fiberglass top with an electronics box and five rod holders, or a larger 6′ x 9′ fiberglass top with rear legs for its large console, as well as a canvas top. This T-Top cover is patterned for the Pair Customs 21 MV with its T-top, and like all of our Pair Customs boat covers, it’s cut to this hull rather than a generic 21-foot size chart.

How It Fits the Pair Customs 21 MV

The cover runs up to the underside of the fiberglass T-top and wraps its legs, so the roof, electronics box and rod holders stay exposed. Below the top it drapes over the console and acrylic windshield, the leaning post and the bow — including forward seating cushions if your boat has them — and falls to the rubrail along the 8’6″ beam. Aft, it covers the livewell and transom, then continues past the bracket as one loose drape over the outboard cowling, with the lower unit exposed. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Have one of the 24-foot Pairs? See our Pair Customs 24 MV T-Top cover and Pair Customs 24 T-Top cover, or compare the Parker 2100 SE T-Top cover.

Sign up for updates and information about our business