Sea Pro 202 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Sea Pro 202 Specifications

  • Builder: Sea Pro Boats, Whitmire (Newberry County), South Carolina
  • Type: Center console, single outboard
  • Length: 19'9"
  • Beam: 8'3"
  • Draft: 13"
  • Deadrise: 16° at transom
  • Dry Weight: About 2,500 lb
  • Fuel: 60 gal
  • Livewells: Two aft
  • Cover Shipping Weight: 30 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Fits up under the T-top or hard top and covers the console, leaning post, bow, cockpit and transom, draping over the outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 30 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the current Sea Pro 202 center console: 19'9" with an 8'3" beam and a single outboard, fitted with a T-top. It isn't for the older Sea Pro 206 or 210 from the original company, or for the 208 bay boat, which are different hulls with their own pages. Please confirm your model and year and which top you have when you order so we can check the pattern before we cut; if you aren't sure, check the model name on your registration or hull paperwork.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Dealers list the 202 with a T-top or an optional fiberglass hard top, and some boats leave the factory with neither. Tell us which top your Sea Pro 202 has when you order so we can check it against the pattern.
The cover runs aft over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
No. This cover is cut to stop at the underside of the top, so it won't close over a 202 with only a console grab rail. Contact us before ordering if your boat has no top so we can check what will fit it.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $940.00  ·  9oz $1,140.00  ·  Sunbrella $1,405.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Sea Pro 202 T-Top Boat Cover — Custom-Fit for the Sea Pro 202 Center Console

Sea Pro Boats builds its fiberglass outboard fishing boats in a 200,000-square-foot plant in Whitmire, in Newberry County, South Carolina. The 202 is one of its current entry-size center consoles, listed by dealers at 19’9″ long with an 8’3″ beam, a 13-inch draft, 16 degrees of deadrise at the transom, about 2,500 lb dry and a 60-gallon fuel tank, with a single outboard. Standard gear on dealer spec sheets includes a leaning post, a cooler slide under the console, two aft livewells, insulated fish boxes, raw-water washdown, a trolling-motor plug and a half swim platform with a telescoping ladder; a deluxe console, a T-top and a fiberglass hard top are listed as options. This T-Top cover is patterned for the Sea Pro 202 with its T-top, and like all of our Sea Pro boat covers, it’s cut to this hull rather than a generic 20-foot size chart.

How It Fits the Sea Pro 202

The cover runs up to the underside of the T-top and wraps its legs, so the roof stays exposed. Below it, the cover takes in the console, windshield and leaning post, then runs forward over the bow seating to the stem and falls to the rubrail along the 8’3″ beam. Aft, it covers the cockpit and the livewell lids, runs over the transom and the half swim platform, and falls as one loose drape over the outboard cowling, with the lower unit exposed. Pull any rods out of the T-top and leaning-post holders first. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the older 20-footer from the original Sea Pro line, see our Sea Pro 206 T-Top cover; for the bay-boat layout, see the Sea Pro 208 T-Top cover.

Sign up for updates and information about our business